36314387000 Kenmore Dishwasher - Overview

Diagrams for 36314387000

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Gasket - White – Part Number: WD08X10057
$104.33
Special Order
Door Gasket - White
★★★★★
★★★★★
(27)
Part #WD08X10057
This one piece dishwasher door gasket provides a water tight seal to keep water from leaking out of your dishwasher.
Piston and Nut Assembly – Part Number: WD24X10018
$30.95
Special Order
Piston and Nut Assembly
★★★★★
★★★★★
(15)
Part #WD24X10018
This is used for the check valve.
Gasket Insert – Part Number: WD08X10015
No Longer Available
Gasket Insert
★★★★★
★★★★★
(2)
Part #WD08X10015
The gasket insert is connected to the gasket in the bottom of your dishwasher door. It is a small piece of white plastic that measures approximately 4 inches by 1 inch, and is sold individually. The gasket insert helps the gasket create a seal on the door, so water doesn’t leak out when the dishwasher is running. If your dishwasher is leaking, check to see if the gasket insert is damaged. If the insert is damaged, you will need to replace it. The problem may be with the gasket itself, in which case you may need to replace that part as well.
Hinge Arm Link – Part Number: WD14X10009
$17.70
Special Order
Hinge Arm Link
★★★★★
★★★★★
(15)
Part #WD14X10009
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In this case, you will need to replace the hinge link. Pull out your dishwasher to inspect the hinge and spring, if the link is broken, it may be disconnected and on the ground already. If not, you can remove the hinge arm link by simply disconnecting it from the hinge and spring, then replacing it with the new part. The hinge arm link is a small piece of white plastic about an inch and a half long. It is sold individually, and is an OEM part from the manufacturer.
Rinse Aid Fill Cap – Part Number: WD12X10284
$78.79
Special Order
Rinse Aid Fill Cap
★★★★★
★★★★★
(5)
Part #WD12X10284
This part helps keep the rinse aid the dispenser until its needed.
Water Inlet Valve – Part Number: WD15X10003
$111.45
Special Order
Water Inlet Valve
★★★★★
★★★★★
(7)
Part #WD15X10003
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed. This valve has a 3/8" inlet and comes with the mounting bracket.
Drain Solenoid and Bracket Assembly – Part Number: WD21X10268
$79.98
Special Order
Drain Solenoid and Bracket Assembly
★★★★★
★★★★★
(5)
Part #WD21X10268
This valve opens in order for the water to drain out of the dishwasher.
Drain Solenoid Kit – Part Number: WD21X10060
$110.06
Special Order
Drain Solenoid Kit
★★★★★
★★★★★
(2)
Part #WD21X10060
This kit includes the armature and linkage assembly.
Impeller and Seal Kit – Part Number: WD19X10032
No Longer Available
Impeller and Seal Kit
★★★★★
★★★★★
(2)
Part #WD19X10032
This part helps stop your dishwasher from leaking. This kit includes the impeller, seal, blade, filter, skidder and skidder holder.
Motor and Pump Kit – Part Number: WD26X10013
$275.11
Special Order
Motor and Pump Kit
★★★★★
★★★★★
(4)
Part #WD26X10013
This pump and motor kit replaces many old style pump and motor kits that were manufactured since 1970. The instructions are included with this kit to help you to make it adaptable to your dishwasher. NOTE: This is a completely redesigned kit by the manufacturer and now includes the drain solenoid.
Third Level Spray Arm – Part Number: WD28X10103
$196.71
Special Order
Third Level Spray Arm
★★★★★
★★★★★
(5)
Part #WD28X10103
Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dishrack. This spray arm does not come with the screws.
Door Latch Kit – Part Number: WD13X10003
$62.07
Special Order
Door Latch Kit
★★★★★
★★★★★
(2)
Part #WD13X10003
This door latch kit is used for dishwashers.

Common Symptoms of the 36314387000

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dishwasher wouldn't fully drain
191 of 206 people found this instruction helpful.
  • Dan from Minnetonka, MN
  • Really Easy
  • Less than 15 mins
  • Nutdriver
I removed the four screws holding the screen and molded plastic cage inside the rear of the dishwasher to expose the check valve assembly. I then unscrewed the piston and nut assembly with my hand and replaced it with the new one. I found that the rubber cone shaped valve on the old piston and nut assembly was entirely disintegrated. T his easy repair solved the problem.
Was this helpful?
Thank you for voting!
Dish washer is not running through cycles
93 of 108 people found this instruction helpful.
  • mike from huntley, IL
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers, Wrench (Adjustable), Wrench set
First and formost before you buy read everything in trouble shooting your dishwasher. Then you do not buy parts you do not need. First you turn off power, then water. Remove two screws, a rubber hose and a hard line by unscrewing if you are lucky some contractors might sweat this on. No biggie just two extra steps that's all. do in reve rse to assemble...
Was this helpful?
Thank you for voting!
D/W would not drain. Water standing in bottom.
65 of 71 people found this instruction helpful.
  • Ed from Cornelius, NC
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
It is a simple process to replace the drain solenoid on these dishwashers, having replaced several in the past few months.

After removing the front bottom panels, I removed the 2 screws holding the old solenoid, unplugged the wire harness, and then switched over the springs to the new solenoid. Assembly was installing 2 scre ws, and plugging in the wire harness.

I work on a 260 + unit property, as well as working for a property management company who rents single family homes.

PartSelect.com is an excellent source of parts, shipping in a quick manner, allowing the repairs to be completed in a timely manner. Thank you.
Was this helpful?
Thank you for voting!