3627121892 Kenmore Range - Overview
Sections of the 3627121892
[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Liquid Propane Orifice Spud
PartSelect #: PS1481262
Manufacturer #: WB28K10376
This is the replacement propane orifice for your gas range. You will find the orifice under the cooktop, beneath the burner. This part supplies liquid propane from the gas line to the stove top. Be su...
$17.70
Special Order
Handle - Stainless
PartSelect #: PS231745
Manufacturer #: WB15K1
Are you tired of struggling with a broken or worn-out broil door handle on your GE range stove or oven? Our replacement GE stainless steel broil door handle is here to solve your problem. This genuine...
$48.95
Special Order
Questions And Answers for 3627121892
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Converting a Natural Gas stove to propane
First just unscrew each natural gas jet and install the propane jets. if they are hard to come off just turn your wrench back and forth first until the jet turns with your fingers. Then open the oven and take out the racks. In the bottom back of the inside of the oven there is a screw on each side. Unscrew both screws lift the bototom plate of the oven and slide it back about 1/2 inch then lift out of the oven. Move the 1 screw covering the heat shield from the oven jet. Then light the top burners and turn them off just to get the gas flowing. Also light the pilot in the oven, then light the oven. To convert the oven from natural gas to propane all you have to do is adjust the jet while the oven is lit. turn the oven jet ubtil there is a blue flame with little or no yellow tips on the flames.
Parts Used:
-
Bruce from Ponchatoula, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Wrench set
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rusty handle
-
george from havelock, NC
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!