36270251603 Kenmore Range - Overview
Sections of the 36270251603
[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Oven Rack
PartSelect #: PS6447646
Manufacturer #: WB48T10095
This single chrome oven rack provides a reliable flat cooking surface for your cookware inside of the oven cavity. The oven rack is made of metal and measures approximately 24” wide by 17 1/2” deep. T...
$90.54
Special Order
Broiler Pan - Large
PartSelect #: PS1517612
Manufacturer #: WB48X10056
Includes the pan and grate.
$68.19
Special Order
Double Burner Assembly
PartSelect #: PS232404
Manufacturer #: WB16K10026
Both burners are mounted on the same bracket.
No Longer Available
Burner Knob
PartSelect #: PS225984
Manufacturer #: WB03K10035
Sold individually. This knob can accept a D-shaped shaft.
$62.32
Special Order
Screw
PartSelect #: PS221932
Manufacturer #: WB01K10002
Size: 8-32 inch Sold individually.
$100.92
Special Order
Thermocouple
PartSelect #: PS1559712
Manufacturer #: WB19K10025
This part senses heat from the pilot.
$73.06
Special Order
Oven Burner and Pilot Assembly
PartSelect #: PS1154893
Manufacturer #: WB16K10061
This part includes the Thermal Coupler.
$136.25
Special Order
Common Symptoms of the 36270251603
[Viewing 4 of 4]Will Not Start
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Gas smell
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven pilot light glowed but would not light.
Sadly, we had order the whole burner assembly , when it was just the thermocouple that was burn up. Pull oven away from wall, access burner assembly, take panel off behind control knobs (4 screws)to expose thermocouple. Install new copper line (thermocouple is attached) in same place where old line comes out. This was kind of tricky , you have to fish it through the insulation. One half goes down to oven burner and one goes to top of oven for stove top burner. Once in place, screw nut down on both ends to hold in place. Put it all back together. No need to replace burner unit if that was not the problem. Now you have a spare.
Parts Used:
-
Terry from Indianola, WA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench (Adjustable)
28 of 34 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My old burners were beyond the point of coming clean and made my stove top look bad.
My husband and I simply took the burner units out of the packing, took the old ones off, put the new ones in. The new units needed to be leveled, but the leveling nuts included fit perfectly, and the entire repair took less than 15 minutes.
Parts Used:
-
Helen from Flemington, NJ
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
23 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
thermo coupler bad
took stove apart and removed part,installed new parts
oven worked great thanks for the correct parts, itseasy to order from you
oven worked great thanks for the correct parts, itseasy to order from you
Parts Used:
-
steve from grand canyon, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench set
22 of 35 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!