362612 Kenmore Range - Overview

Models starting with 362612

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Liquid Propane Orifice Spud – Part Number: WB28K10376
$17.70
Special Order
Liquid Propane Orifice Spud
Part #WB28K10376
This is the replacement propane orifice for your gas range. You will find the orifice under the cooktop, beneath the burner. This part supplies liquid propane from the gas line to the stove top. Be sure to disconnect your range from its power source and turn off the gas line before you begin this repair. The orifices should simply screw out, and the new one will screw in. This part is about ¼ of a inch in diameter and is gold in color. It is sold individually and is a genuine OEM part.
Screw - Package of 12 – Part Number: WZ4X345D
$93.28
Special Order
Screw - Package of 12
Part #WZ4X345D
HANDLE – Part Number: WB15K3
No Longer Available
HANDLE
Part #WB15K3
Burner Grate – Part Number: WB31K17
No Longer Available
Burner Grate
Part #WB31K17
Sold individually.
GROMMET – Part Number: WB2K8
$11.95
Special Order
GROMMET
Part #WB2K8
GSKT OV SEAL – Part Number: WB32K2
$12.95
Special Order
GSKT OV SEAL
Part #WB32K2
THERMOS KNOB – Part Number: WB3K60
No Longer Available
THERMOS KNOB
Part #WB3K60
Spark Module (2+0) – Part Number: WB20K5037
$181.99
Special Order
Spark Module (2+0)
Part #WB20K5037
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
End Cap - Stainless - Left Side – Part Number: WB7K79
No Longer Available
End Cap - Chrome - Right Side – Part Number: WB7K80
No Longer Available
USE GEH WB1X119 – Part Number: WB01X0119
No Longer Available
USE GEH WB1X119
Part #WB01X0119
USE GEH WB3K28 – Part Number: WB03K0028
No Longer Available
USE GEH WB3K28
Part #WB03K0028
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Converting a Natural Gas stove to propane
3 of 3 people found this instruction helpful.
  • Bruce from Ponchatoula, LA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers, Wrench set
First just unscrew each natural gas jet and install the propane jets. if they are hard to come off just turn your wrench back and forth first until the jet turns with your fingers. Then open the oven and take out the racks. In the bottom back of the inside of the oven there is a screw on each side. Unscrew both screws lift the bototom pla te of the oven and slide it back about 1/2 inch then lift out of the oven. Move the 1 screw covering the heat shield from the oven jet. Then light the top burners and turn them off just to get the gas flowing. Also light the pilot in the oven, then light the oven. To convert the oven from natural gas to propane all you have to do is adjust the jet while the oven is lit. turn the oven jet ubtil there is a blue flame with little or no yellow tips on the flames.
Was this helpful?
Thank you for voting!
Needed to replace the oven dial on the front of the stove. Your website made it easy to identify the part number and describe the placement to the tel. oper. Thank you!
4 of 7 people found this instruction helpful.
  • Sally from Dallas, TX
  • Really Easy
  • Less than 15 mins
Stuck the dial/knob onto the existing stem for oven temp. control. Not exactly rocket science. It was harder to find the part than to install it.
Was this helpful?
Thank you for voting!