360 (Type 9) Porter Cable Sander Polisher - Overview

Included in part number 864707

This Ball Bearing has metal shielding on both sides. This is a genuine Porter Cable replacement part that is sold individually. • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This ...Read morereduces wear on the tool and allows it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

This replacement cork pad is specially manufacturer for use with Porter Cable belt sanders. It is an authentic part that is sourced directly from original manufacturer. It is helps to minimize the vibration created by moving belt. Due to constant contact, pressure and vibration this part should be inspected periodically and replaced if sh...Read moreowing signs of wear to ensure optimum performance. Includes one (1) cork/rubber plate. Please note the steel plate and screws are sold separately. To complete this repair you should only need a screwdriver. • Remove screws that hold the steel plate • This will allow you to remove the old cork plate • Place the new one over the steel plate • Reassemble and test the sander

This replacement cork plate/pad is designed for use with Porter Cable sanders. It is sourced directly from original equipment manufacturer. The purpose of this part is to help minimize the vibration created by moving belt. This part should be inspected periodically and replaced if needed to ensure optimum performance. This rubber/cork pla...Read morete is sold individually. Please note the steel plate and screws are sold separately. To replace this part is you should only need a screwdriver • Unscrew the steel plate • Remove the old cork plate • Place the new one over the steel plate • Secure the steel plate