358799910 Craftsman Leaf Blower / Vacuum - Overview

Diagrams for 358799910

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Screw – Part Number: 691340
No Longer Available
Screw
Part #691340
This is an authentic OEM sourced item which is designed for Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It is a special screw which is generally utilized to secure the muffler, make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.
Spring-governor – Part Number: 691596
No Longer Available
Spring-governor
Part #691596
This is an authentic replacement part sourced directly from the manufacturer. The governor spring is commonly found in Briggs & Stratton engines. This part is made of metal, and is used to apply tension to the governor control lever. You may require a wrench and pliers when replacing this part. This is an individually sold item.
Screw 5Pk – Part Number: STD610603
No Longer Available
Screw 5Pk
Part #STD610603
Nut 8Pk – Part Number: STD541410
No Longer Available
Nut 8Pk
Part #STD541410
Screw 8Pk – Part Number: STD511003
No Longer Available
Screw 8Pk
Part #STD511003
Wheel Nut – Part Number: STD541131
No Longer Available
Wheel Nut
Part #STD541131
This is an original Craftsman replacement part. The wheel nut is designed by the manufacturer for use on a variety of machines, such as chainsaws, lawn tractors, snowblowers, sanders, and drills. This is a set of eight nuts, which may be found in various locations in the machine, depending on model. Please be aware that there are different nuts used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item.
Flat Washer, 8Pk – Part Number: STD551031
No Longer Available
Flat Washer, 8Pk
Part #STD551031
This is sold as a set that contains eight washers. These parts attach to the tank and are made out of metal. They are genuine items that are supplied by the original equipment manufacturer for use with Craftsman air compressors. During replacement, it may require a wrench to help install these parts correctly. They will require replacing if they become bent or broken.
Screw – Part Number: 94225
No Longer Available
Screw
Part #94225
Ring – Part Number: 94243
No Longer Available
Ring
Part #94243
Screw – Part Number: 15407
No Longer Available
Screw
Part #15407
Lead – Part Number: 39082
No Longer Available
Lead
Part #39082
Muffler – Part Number: 24361
No Longer Available
Muffler
Part #24361

Common Symptoms of the 358799910

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
installing fuel through fuel tank wall
11 of 18 people found this instruction helpful.
  • RICHARD from BROCKTON, MA
  • Difficult
  • More than 2 hours
  • Pliers, Screw drivers
To start, remove the plastic carburetor grill. DO NOT remove the carburetor. The fuel line has to be sliced down to fit through the tank hole and get it in far enough up into the tank to grab with needle nose pliers.( need long needle nose pliers which I didn't have) I placed about six inches of the plastic tubing in the jaws of vice so t hat half of the tube was squeezed in the vice jaws. I then used a razor blade to shave off the exposed tube. I slipped the shaved end of the tube up through the tank hole far enough to grab with long tweezers and pulled it up to where I could grab it in the tank with needle nose pliers. I put light lube oil on the remaining tubing and pulled it through. It takes a steady firm pull to pull it in. Install the filter and pull the tube back down into the tank. I also used a small diameter drill bit and with my fingers slightly reamed the tube ends to ease the tube over the filter and carburetor nipples. To prime the engine, spray starting fluid into the carburetor and start. Repeat until the engine will run on fuel. It took me hours to figure this out, but will take less than an hour with this method.
Was this helpful?
Thank you for voting!
Split fuel line driving brother-in-law to frustration
1 of 5 people found this instruction helpful.
  • Howard from UNICOI, TN
  • Really Easy
  • 30 - 60 mins
  • Pliers
Seven screw, three case cover, two air cleaner, two carb mounting, pulled carb, drained tank, pulled old fuel line, treaded new one in, wire to thread, thread to angle cut fuel line. Reassemble, test, sharpen chain, retest…not exactly a doityourselfer, graduate degree in mechanical/industrial engineering and former medium/heavy mechanica l. Get fuel line on carb prior to reassembly, line may need some stretching with a tapered punch.
Was this helpful?
Thank you for voting!