358797910 Craftsman Leaf Blower / Vacuum - Overview

Diagrams for 358797910

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Spark Plug – Part Number: CJ8Y
No Longer Available
Spark Plug
Part #CJ8Y
Ignition Module – Part Number: 530039137
No Longer Available
Ignition Module
Part #530039137
Bearing – Part Number: 530-032102
No Longer Available
Bearing
Part #530-032102
Needle – Part Number: 530-035212
No Longer Available
Needle
Part #530-035212
Screw 8Pk – Part Number: STD610602
No Longer Available
Screw 8Pk
Part #STD610602
Rod Assembly – Part Number: 530-014005
No Longer Available
Rod Assembly
Part #530-014005
Retaining Ring – Part Number: 530-015789
No Longer Available
Retaining Ring
Part #530-015789
Pin – Part Number: 530-035028
No Longer Available
Pin
Part #530-035028
Washer – Part Number: 530-035217
No Longer Available
Washer
Part #530-035217
O-Ring – Part Number: 530-035218
No Longer Available
O-Ring
Part #530-035218
Blower Housing – Part Number: 530-014265
No Longer Available
Blower Housing
Part #530-014265
Element – Part Number: 530-029449
No Longer Available
Element
Part #530-029449

Questions And Answers for 358797910

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis - For model number 358797910
October 21, 2021
Can i buy this a carborator kit for this model
Chris Boyle Profile
Hello Dennis, thank you for your question. We have researched the model you have provided, and we would suggest the Carburetor Kit, part number PS9977029. We hope this helps!
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 358797910

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
installing fuel through fuel tank wall
11 of 18 people found this instruction helpful.
  • RICHARD from BROCKTON, MA
  • Difficult
  • More than 2 hours
  • Pliers, Screw drivers
To start, remove the plastic carburetor grill. DO NOT remove the carburetor. The fuel line has to be sliced down to fit through the tank hole and get it in far enough up into the tank to grab with needle nose pliers.( need long needle nose pliers which I didn't have) I placed about six inches of the plastic tubing in the jaws of vice so t hat half of the tube was squeezed in the vice jaws. I then used a razor blade to shave off the exposed tube. I slipped the shaved end of the tube up through the tank hole far enough to grab with long tweezers and pulled it up to where I could grab it in the tank with needle nose pliers. I put light lube oil on the remaining tubing and pulled it through. It takes a steady firm pull to pull it in. Install the filter and pull the tube back down into the tank. I also used a small diameter drill bit and with my fingers slightly reamed the tube ends to ease the tube over the filter and carburetor nipples. To prime the engine, spray starting fluid into the carburetor and start. Repeat until the engine will run on fuel. It took me hours to figure this out, but will take less than an hour with this method.
Was this helpful?
Thank you for voting!
Split fuel line driving brother-in-law to frustration
1 of 5 people found this instruction helpful.
  • Howard from UNICOI, TN
  • Really Easy
  • 30 - 60 mins
  • Pliers
Seven screw, three case cover, two air cleaner, two carb mounting, pulled carb, drained tank, pulled old fuel line, treaded new one in, wire to thread, thread to angle cut fuel line. Reassemble, test, sharpen chain, retest…not exactly a doityourselfer, graduate degree in mechanical/industrial engineering and former medium/heavy mechanica l. Get fuel line on carb prior to reassembly, line may need some stretching with a tapered punch.
Was this helpful?
Thank you for voting!