358351901 Craftsman Chainsaw - Overview

Diagrams for 358351901

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
18 Chain – Part Number: 91PX062G
No Longer Available
18 Chain
Part #91PX062G
Clutch Housing Cover – Part Number: 545199703
No Longer Available
Clutch Housing Cover
Part #545199703
Spark Plug – Part Number: CJ8Y
No Longer Available
Spark Plug
Part #CJ8Y
Assy, Tool-less Knob – Part Number: 579107301
No Longer Available
Assy, Tool-less Knob
Part #579107301
This replacement OEM part is specially designed for Poulan chainsaws. It is the tool-less knob assembly that attaches to the chain brake assembly. The knob provides a user with a comfortable grip to adjust the chain tension. It has internal threads which allow it to be secured and removed without any tools. Check the owner's manual and the diagrams of your model for the correct application of this part. One durable component is included. Chain tension is very important. Chains stretch during use. This is especially true during the first few times you use your saw. Always check chain tension each time before you start the chainsaw.
Carrying Case – Part Number: 545160901
No Longer Available
Carrying Case
Part #545160901
Car Scabbard – Part Number: 545097401
No Longer Available
Car Scabbard
Part #545097401
Housing - Fan – Part Number: 575608201
No Longer Available
Housing - Fan
Part #575608201
Kit - Spark Arrestor – Part Number: 515006056
No Longer Available
Kit - Spark Arrestor
Part #515006056

Manuals & Care Guides for 358351901

Click to download

Common Symptoms of the 358351901

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Both the Fuel line and the Engine fuel line, where dry rotted.
57 of 75 people found this instruction helpful.
  • Victor from SCOTTSVILLE, KY
  • Very Easy
  • 15 - 30 mins
  • Pliers, Socket set
1) While still attached to the fuel tank, I first sized up the old fuel lines with the newer fuel lines.
2) With a pair of needle nose players, I then removed the old dry rotted fuel ?? lines, from the fuel tank.
3) I cleaned the fuel tank and around the carburetor area, to insure that there was no debris, that could possibly fa ll into the path of the new fuel lines installation.
4) I then installed the smaller one of the fuel lines, so that it would be out of the way, of the larger fuel line. I Pulled the fuel line through the smaller hole in the fuel tank, with needle nose players. I pulled the smaller fuel line out through the fuel tank filler hole, attached the fuel filter to the smaller fuel line. I Made sure that the fuel filter was extended to the furthest end of the fuel tank bottom. Six inches in all. I then attached the smaller fuel line to the carburetor.
5) I Installed the larger fuel line, followed the same procedures as the smaller fuel line.
6) Both fuel lines where cut on an angle for easy installation. No lubricant was necessary.
7) I filled up the fuel tank with fresh fuel and oil, new air filter and spark plug. It started on the first pull. Amazing.
Was this helpful?
Thank you for voting!
Fuel line size - Important
14 of 20 people found this instruction helpful.
  • Lawrence from ORION, MI
  • Really Easy
  • 30 - 60 mins
Be sure the fuel line is the exact same size (id and od) as the one you are replacing. I had purchased a Fuel line from my local dealer - and after a few hours I figured out that it was the wrong size! He simply cut some line from a spool he had. Didn't bother to look it up! The line from this site was perfect! The id is important because the line has to Compress to go through the hole.
Was this helpful?
Thank you for voting!
Would not start , had been sitting for years,
11 of 13 people found this instruction helpful.
  • Sherri from BREAUX BRIDGE, LA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
I did not write detail steps , basically remove old carb replaced with new one, reassembled started right up no adjustments were needed !
Was this helpful?
Thank you for voting!