358351191 Craftsman Chainsaw - Overview

Diagrams for 358351191

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
853 Plug – Part Number: CJ7Y
No Longer Available
853 Plug
Part #CJ7Y
Chain – Part Number: 20BPX072G
No Longer Available
Chain
Part #20BPX072G
Lockout – Part Number: 530038988
No Longer Available
Lockout
Part #530038988
Cover – Part Number: 530036133
No Longer Available
Cover
Part #530036133
Fan Housing Assembly – Part Number: 530069734
No Longer Available
Fan Housing Assembly
Part #530069734
Trigger – Part Number: 530038987
No Longer Available
Trigger
Part #530038987
Chain Brake Kit – Part Number: 952706607
No Longer Available
Chain Brake Kit
Part #952706607
Handle – Part Number: 530036087
No Longer Available
Handle
Part #530036087
Decal-Inst/K – Part Number: 530038143
No Longer Available
Decal-Inst/K
Part #530038143
Metering Diaphragm – Part Number: 530-03014
No Longer Available
Metering Diaphragm
Part #530-03014
Flywheel Nut – Part Number: 530016139
No Longer Available
Flywheel Nut
Part #530016139

Manuals & Care Guides for 358351191

Click to download

Common Symptoms of the 358351191

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
installing fuel through fuel tank wall
11 of 18 people found this instruction helpful.
  • RICHARD from BROCKTON, MA
  • Difficult
  • More than 2 hours
  • Pliers, Screw drivers
To start, remove the plastic carburetor grill. DO NOT remove the carburetor. The fuel line has to be sliced down to fit through the tank hole and get it in far enough up into the tank to grab with needle nose pliers.( need long needle nose pliers which I didn't have) I placed about six inches of the plastic tubing in the jaws of vice so t hat half of the tube was squeezed in the vice jaws. I then used a razor blade to shave off the exposed tube. I slipped the shaved end of the tube up through the tank hole far enough to grab with long tweezers and pulled it up to where I could grab it in the tank with needle nose pliers. I put light lube oil on the remaining tubing and pulled it through. It takes a steady firm pull to pull it in. Install the filter and pull the tube back down into the tank. I also used a small diameter drill bit and with my fingers slightly reamed the tube ends to ease the tube over the filter and carburetor nipples. To prime the engine, spray starting fluid into the carburetor and start. Repeat until the engine will run on fuel. It took me hours to figure this out, but will take less than an hour with this method.
Was this helpful?
Thank you for voting!
Split fuel line driving brother-in-law to frustration
1 of 5 people found this instruction helpful.
  • Howard from UNICOI, TN
  • Really Easy
  • 30 - 60 mins
  • Pliers
Seven screw, three case cover, two air cleaner, two carb mounting, pulled carb, drained tank, pulled old fuel line, treaded new one in, wire to thread, thread to angle cut fuel line. Reassemble, test, sharpen chain, retest…not exactly a doityourselfer, graduate degree in mechanical/industrial engineering and former medium/heavy mechanica l. Get fuel line on carb prior to reassembly, line may need some stretching with a tapered punch.
Was this helpful?
Thank you for voting!