This OEM Poulan Chainsaw Bar Adjustment Kit is used to adjust the tension of the bar to keep the cutting chain tight for proper operation. It includes Retainer Ring, Pin and the Adjustment Bolt. Chain...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Albert
May 25, 2023
Is there only one chainsaw guide?
For model number 358350980
Hello Albert, thank you for the question. According to our research, your model comes with only one manual. We have attached the link to the manual. We hope this helps!
Pulled rope pull assembly housing, 4 screws and removed center screw that holds the eps plastic gear and spring was under neath that and it was bent out of shape. Important part is install new spring with yellow painted end outward , toward housing! Lucky I bought two??
I tried a few adjustment on the carb jets and the idle speed but it got worse. I opened it up and discovered that the carburetor was loose and the engine was sucking air at the carburetor mount. One of the nuts was lost so I ordered a replacement part and a spare in case it happens again. This saw has worn out at least 6 chains, three guide bars and a sprocket. Had one other repair a year ago when it broke a clutch spring in the sprocket.
