358350821 Craftsman Chainsaw - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer 8Pk – Part Number: STD551008
No Longer Available
Washer 8Pk
Part #STD551008
18 Chain – Part Number: 91PX062G
No Longer Available
18 Chain
Part #91PX062G
Thrust Washer – Part Number: 530015177
No Longer Available
Thrust Washer
Part #530015177
O-Ring 5Pk – Part Number: STD302018
No Longer Available
O-Ring 5Pk
Part #STD302018
Machine Screw, 8-pack – Part Number: STD510803
No Longer Available
Machine Screw, 8-pack
Part #STD510803
Gasket – Part Number: 530034043
No Longer Available
Gasket
Part #530034043
Screw – Part Number: STD522506
No Longer Available
Screw
Part #STD522506
Screw 8Pk – Part Number: STD510805
No Longer Available
Screw 8Pk
Part #STD510805
Nut 8Pk – Part Number: STD541410
No Longer Available
Nut 8Pk
Part #STD541410
Screw 8Pk – Part Number: STD511003
No Longer Available
Screw 8Pk
Part #STD511003
Gasket – Part Number: 530034064
No Longer Available
Gasket
Part #530034064
Gasket – Part Number: 530019062
No Longer Available
Gasket
Part #530019062

Manuals & Care Guides for 358350821

Click to download

Common Symptoms of the 358350821

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Both the Fuel line and the Engine fuel line, where dry rotted.
57 of 75 people found this instruction helpful.
  • Victor from SCOTTSVILLE, KY
  • Very Easy
  • 15 - 30 mins
  • Pliers, Socket set
1) While still attached to the fuel tank, I first sized up the old fuel lines with the newer fuel lines.
2) With a pair of needle nose players, I then removed the old dry rotted fuel ?? lines, from the fuel tank.
3) I cleaned the fuel tank and around the carburetor area, to insure that there was no debris, that could possibly fa ll into the path of the new fuel lines installation.
4) I then installed the smaller one of the fuel lines, so that it would be out of the way, of the larger fuel line. I Pulled the fuel line through the smaller hole in the fuel tank, with needle nose players. I pulled the smaller fuel line out through the fuel tank filler hole, attached the fuel filter to the smaller fuel line. I Made sure that the fuel filter was extended to the furthest end of the fuel tank bottom. Six inches in all. I then attached the smaller fuel line to the carburetor.
5) I Installed the larger fuel line, followed the same procedures as the smaller fuel line.
6) Both fuel lines where cut on an angle for easy installation. No lubricant was necessary.
7) I filled up the fuel tank with fresh fuel and oil, new air filter and spark plug. It started on the first pull. Amazing.
Was this helpful?
Thank you for voting!
Replace the fuel lines
19 of 25 people found this instruction helpful.
  • Robert from MANVILLE, NJ
  • Really Easy
  • 30 - 60 mins
Replaced all fuel lines. Followed instructions found on Partselect.com, which said to insert cut fuel line in tank and use forceps to reach back in the tank and pull the fuel line through. The problem was that I did not have forceps, or needle nosed pliers that could reach the end of the hose.

Instead of running the line into the tank, I found another suggestion online to run the line from inside the tank outward, allowing me to grab the line with any pliers and thread it. The way I did this was used about a foot length of 14 gauge copper wire. Put an inch or two into the hose (that has been cut on an angle), and use a little black tape to secure the hose on the wire. Now you should be able to route the stiff wire from inside the tank to the fuel hole in the tank. Fish the wire through, and it should be enough to get the tapered end through the tank. Pull the copper wire, mine came out, but there was enough of the hose exposed on the outside of the tank for me to grab with pliers and pull it through.
Was this helpful?
Thank you for voting!
Fuel line size - Important
14 of 20 people found this instruction helpful.
  • Lawrence from ORION, MI
  • Really Easy
  • 30 - 60 mins
Be sure the fuel line is the exact same size (id and od) as the one you are replacing. I had purchased a Fuel line from my local dealer - and after a few hours I figured out that it was the wrong size! He simply cut some line from a spool he had. Didn't bother to look it up! The line from this site was perfect! The id is important because the line has to Compress to go through the hole.
Was this helpful?
Thank you for voting!