358350201 Craftsman Chainsaw - Overview

Diagrams for 358350201

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bar-20" Am-P – Part Number: 530044695
No Longer Available
Bar-20" Am-P
Part #530044695
Chain – Part Number: 33SL078G
No Longer Available
Chain
Part #33SL078G
Clutch Cover – Part Number: 530054261
No Longer Available
Clutch Cover
Part #530054261
Decal Fan Hsg. – Part Number: 530054262
No Longer Available
Decal Fan Hsg.
Part #530054262
Fan Hsg. P60 – Part Number: 530054712
No Longer Available
Fan Hsg. P60
Part #530054712
Chassis – Part Number: 530054713
No Longer Available
Chassis
Part #530054713
Decal – Part Number: 530054933
No Longer Available
Decal
Part #530054933
Flywheel Nut – Part Number: 530016139
No Longer Available
Flywheel Nut
Part #530016139

Manuals & Care Guides for 358350201

Click to download

Exact Part matches for your search term

BATTERY HOUSING – Part Number: 358350201
No Longer Available
BATTERY HOUSING
This part number matches the current model number 358350201
Part #358350201

Common Symptoms of the 358350201

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
installing fuel through fuel tank wall
11 of 18 people found this instruction helpful.
  • RICHARD from BROCKTON, MA
  • Difficult
  • More than 2 hours
  • Pliers, Screw drivers
To start, remove the plastic carburetor grill. DO NOT remove the carburetor. The fuel line has to be sliced down to fit through the tank hole and get it in far enough up into the tank to grab with needle nose pliers.( need long needle nose pliers which I didn't have) I placed about six inches of the plastic tubing in the jaws of vice so t hat half of the tube was squeezed in the vice jaws. I then used a razor blade to shave off the exposed tube. I slipped the shaved end of the tube up through the tank hole far enough to grab with long tweezers and pulled it up to where I could grab it in the tank with needle nose pliers. I put light lube oil on the remaining tubing and pulled it through. It takes a steady firm pull to pull it in. Install the filter and pull the tube back down into the tank. I also used a small diameter drill bit and with my fingers slightly reamed the tube ends to ease the tube over the filter and carburetor nipples. To prime the engine, spray starting fluid into the carburetor and start. Repeat until the engine will run on fuel. It took me hours to figure this out, but will take less than an hour with this method.
Was this helpful?
Thank you for voting!
Split fuel line driving brother-in-law to frustration
1 of 5 people found this instruction helpful.
  • Howard from UNICOI, TN
  • Really Easy
  • 30 - 60 mins
  • Pliers
Seven screw, three case cover, two air cleaner, two carb mounting, pulled carb, drained tank, pulled old fuel line, treaded new one in, wire to thread, thread to angle cut fuel line. Reassemble, test, sharpen chain, retest…not exactly a doityourselfer, graduate degree in mechanical/industrial engineering and former medium/heavy mechanica l. Get fuel line on carb prior to reassembly, line may need some stretching with a tapered punch.
Was this helpful?
Thank you for voting!