358341950 Craftsman Chainsaw - Overview

Diagrams for 358341950

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Spark Plug – Part Number: CJ8Y
No Longer Available
Spark Plug
Part #CJ8Y
18 Chain – Part Number: 91PX062G
No Longer Available
18 Chain
Part #91PX062G
Fan Housing – Part Number: 545045901
No Longer Available
Fan Housing
Part #545045901
Cylinder Shield – Part Number: 545045801
No Longer Available
Cylinder Shield
Part #545045801
Chain 14-In. – Part Number: 42578
No Longer Available
Chain 14-In.
Part #42578
European Baffle – Part Number: 545045701
No Longer Available
European Baffle
Part #545045701
Handle Cover – Part Number: 545011906
No Longer Available
Handle Cover
Part #545011906
Manual – Part Number: 115488427
No Longer Available
Manual
Part #115488427
Warning Decal – Part Number: 530059905
No Longer Available
Warning Decal
Part #530059905
Bar 18" – Part Number: 71-36638
No Longer Available
Bar 18"
Part #71-36638
Bar 14-In. Sn 9 – Part Number: 530044691
No Longer Available
Bar 14-In. Sn 9
Part #530044691
Igniter Module – Part Number: 585838301
No Longer Available
Igniter Module
Part #585838301

Common Symptoms of the 358341950

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Would not start , had been sitting for years,
11 of 13 people found this instruction helpful.
  • Sherri from BREAUX BRIDGE, LA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
I did not write detail steps , basically remove old carb replaced with new one, reassembled started right up no adjustments were needed !
Was this helpful?
Thank you for voting!
Worn out oil pump/burning chains
6 of 6 people found this instruction helpful.
  • William from EVANSVILLE, IN
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
After checking several different videos, ordered the repair parts and two specialty tools( Clutch removal/install and a worm drive remover/installer) Total for parts and tools around 45.00. Much cheaper than the shop wanted, 85.00 to look at it plus parts. As for results I've used the chainsaw all afternoon no problem. Runs like it did 12 yrs ago. Pumps oil the would make Jed Clampet proud
Was this helpful?
Thank you for voting!
My neighbor brought the saw to me. It was locked up
4 of 4 people found this instruction helpful.
  • Marvin from KIRBYVILLE, TX
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers, Wrench (Adjustable)
He didn't want to spend alot of money on it. So I got the jug (Head) off and sanded it and the piston down while I waited on the new piston ring to get here. I found that it was easier putting the new ring in and the piston back into the jug (Head) was to go ahead and take the piston out so you could turn the jug (Head) upside down and it slid right in. It didn't take no time at all. And it now runs as good as new
Was this helpful?
Thank you for voting!