34-335 (Type 1) Delta Table Saw - Overview

This part is made of metal and is available as an individual replacement. The hex nut connects to the lock washer and the driver roller. When replacing this part a wrench will be needed. It will need to be replaced if it becomes stripped or broken. This is an authentic Delta replacement part that is sourced from the original manufacturer for use with sanders and table saws.

This is a genuine manufacturer sourced replacement part used on Delta and Black and Decker equipment. It helps to distribute the pressure evenly and provide a tight seal between connected components. This is a standard hardware which may have multiple applications. For the exact location please refer to the diagrams of your specific model. This part is made of high-quality metal and is sold individually.

This is a genuine manufacturer-sourced replacement part which is specially designed for use with Delta drill presses. It helps to distribute the pressure evenly while allowing parts to be secured safely. This is a standard hardware which has multiple applications based on your equipment. Please make sure to refer to the appropriate diagra...Read morems of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This metal pin helps hold and align the blade guard or splitter pivot on a table saw. A loose, crooked, or hard-to-move guard may mean the pin is bent, broken, or missing. Before replacing it, inspect the pivot bracket, mounting holes, clips, and nearby hardware for wear. Confirm fit with the complete saw model, type number, and parts dia...Read moregram as there are multiple pins located in the units. Unplug the saw and lower the blade before service. Install the pin in the position shown, then make sure the guard moves freely and stays aligned before using the saw.