33R877 (0012-G1) Briggs and Stratton Engine - Overview
Sections of the 33R877
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Puller-flywheel
PartSelect #: PS8905120
Manufacturer #: 19203
This flywheel puller is designed for servicing larger small engines by safely removing tightly seated flywheels without stressing the crankshaft or damaging ignition components. Constructed from heavy...
$33.95
Special Order
Tappet-valve
PartSelect #: PS9062396
Manufacturer #: 690564
This valve tappet is a genuine OEM replacement designed for small engine applications. It plays a key role in proper valve operation by ensuring accurate timing and smooth movement, helping reduce int...
$17.95
Special Order
Engine Oil Seal
PartSelect #: PS9151828
Manufacturer #: 795387
$12.95
In Stock
Order within the next 10 hrs and your part ships today!
Nut
PartSelect #: PS9062692
Manufacturer #: 690958
This is a genuine manufacturer-sourced component which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It provides an identical replacem...
$5.95
Special Order
Seal-choke/thr Shaft
PartSelect #: PS9063574
Manufacturer #: 690998
It is a genuine OEM item that is made for Briggs and Stratton engines that are commonly installed on a variety of lawn and garden equipment. This is a special component which helps to provide a tight ...
$13.95
Special Order
Seal-dipstick Tube
PartSelect #: PS9063583
Manufacturer #: 691032
This is an authentic OEM sourced replacement part which is specially designed for use with lawn and garden equipment. The purpose of this part is to provide a tight seal between connected parts, over ...
$9.95
Special Order
Common Symptoms of the 33R877
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Stopped running. Turned to be a bent intake push rod and broken rocker arm
Removed head. Replaced both rocker arms, intake pus rod, push rod guide exhaust and head gaskets. Torqued head in 3 stages to 216 in/lbs. gapped intake to .004 and exhaust to .006 at TDC
Added oil and gas. Now running great
If you need to replace push rods use steel (exhaust) they are the same length
The engine was a Briggs & Stratton 217802 0113 E10604 (2006 year date code)
I used the following
796189 gasket
272475S gasket
697494 push rod
690822 push rod guide
691751 rocker arms
Added oil and gas. Now running great
If you need to replace push rods use steel (exhaust) they are the same length
The engine was a Briggs & Stratton 217802 0113 E10604 (2006 year date code)
I used the following
796189 gasket
272475S gasket
697494 push rod
690822 push rod guide
691751 rocker arms
Parts Used:
-
Rene from COVINGTON, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Socket set, Wrench set
9 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas leaking from tube breather
First I opened the top of the mower to expose the housing cover. Secondly I removed the four housing bolts to remove the housing cover from the mower. Next I removed the tube breather and installed the new tube breather and replaced the housing cover with the four bolts previously removed and closed the top of the mower. I filled the mower with gas to check for leaks which weren't any leaks. I proceeded to mow the lawn with ease.
Parts Used:
-
Emanuel from FERRIDAY, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
9 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!