31AM63TF799 Craftsman Snow Blower - Overview

Diagrams for 31AM63TF799

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Screw 5Pk – Part Number: STD522515
No Longer Available
Screw 5Pk
Part #STD522515
Flat Washer, 8Pk – Part Number: STD551031
No Longer Available
Flat Washer, 8Pk
Part #STD551031
This is sold as a set that contains eight washers. These parts attach to the tank and are made out of metal. They are genuine items that are supplied by the original equipment manufacturer for use with Craftsman air compressors. During replacement, it may require a wrench to help install these parts correctly. They will require replacing if they become bent or broken.
Snow Blower Oil Seal – Part Number: 721-0327
No Longer Available
Snow Blower Oil Seal
Part #721-0327
ROD GOVERNOR – Part Number: 751P10665A
No Longer Available
ROD GOVERNOR
Part #751P10665A
CAM-CLUTCH LOCK – Part Number: 731-04896C
No Longer Available
CAM-CLUTCH LOCK
Part #731-04896C
WASHER-FLAT – Part Number: 42828
No Longer Available
WASHER-FLAT
Part #42828
DOWEL PIN – Part Number: 715-04088A
No Longer Available
DOWEL PIN
Part #715-04088A
AUGER ENGAGE, RED – Part Number: 684-04111D
No Longer Available
AUGER ENGAGE, RED
Part #684-04111D
HEX SHAFT, .8125, 7-TOOTH – Part Number: 917-04209B
No Longer Available
HEX SHAFT, .8125, 7-TOOTH
Part #917-04209B
Guide Bracket, Drive Cable – Part Number: 790-00207B-0637
No Longer Available
Guide Bracket, Drive Cable
Part #790-00207B-0637
Key – Part Number: 428277
No Longer Available
Key
Part #428277
PULLEY-HALF-A 2.76 – Part Number: 756-06563
No Longer Available
PULLEY-HALF-A 2.76
Part #756-06563

Common Symptoms of the 31AM63TF799

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Original shave plate badly worn
12 of 25 people found this instruction helpful.
  • John from HARRISVILLE, NH
  • Really Easy
  • Less than 15 mins
  • Wrench set
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, app ly heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Was this helpful?
Thank you for voting!