316711023 Craftsman Trimmer - Overview

Diagrams for 316711023

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
MUFFLER ASM – Part Number: 753-08745
No Longer Available
MUFFLER ASM
Part #753-08745
SCREW:10-32X.562:#8P – Part Number: 1964
No Longer Available
SCREW:10-32X.562:#8P
Part #1964
This is a genuine OEM sourced replacement housing screw designed for Ryobi and Troy-Bilt trimmers and blowers. It is commonly utilized to secure the starter housing. Please note, this metal housing screw is sold individually. A torx screwdriver may be required to secure or remove it.

Common Symptoms of the 316711023

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fuel line broke
13 of 16 people found this instruction helpful.
  • Erik from ROBERTSDALE, AL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done.
Was this helpful?
Thank you for voting!
string trimmer would not start
8 of 10 people found this instruction helpful.
  • john from SHARPSVILLE, PA
  • Really Easy
  • 15 - 30 mins
emptied fuel from tank. pulled off the 2 fuel lines from the carburetor.opened the air cleaner door. removed the 2 torque screws that hold on the carburetor. removed the carburetor and air cleaner gasket. installed new carburetor and gasket and put back and tightened the 2 torque screws. closed air cleaner door and pushed the fuel lines o nto the new carburetor.put some fuel in the tank. started the trimmer. runs great.
Was this helpful?
Thank you for voting!
Replace Starter Housing with broken pull cord.
2 of 2 people found this instruction helpful.
  • Timothy from GAINESBORO, TN
  • Really Easy
  • 30 - 60 mins
  • Wrench (Adjustable)
1. Remove Shaft & clutch cover by removing 3 torx screws and loosening cinch bolt.

2. Remove clutch assembly with torx tool in center and then by cinching the shaft and turning spring assembly counter clockwise with an adjustable wrench.

3. Remove starter housing by removing 3 Torx bolts from the front and a screw from the back.

4 Reverse the process.
Was this helpful?
Thank you for voting!