315171020 Craftsman Reciprocating Saw - Overview

This authentic replacement part is designed for use with Craftsman power tools. Ball bearings are used to reduce friction between rotating parts, unfortunately, over time components may wear out and begin to fail eventually requiring a replacement. Make sure to check the appropriate diagrams of your model for the correct location and application of this hardware.

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with power tools. The special nuts are used with several different types of tools and the application of the nuts can vary based on the type of equipment. The nuts are sold in packs of eight and the packs are sold individually.

This is an original part from Craftsman for use with Reciprocating Saws. The motor brush holder positions the motor brush against the armature in the motor. The most common reasons for replacing the motor brush holder is if the carbon brush is not contacting the armature, the carbon brush is loose (or misaligned) within the holder, the ho...Read morelder is melted around the carbon brush, the plastic brush holder is melted in the housing, the brush holder is loose or damaged, or there is loss of power to the saw. This part is sold individually. The tools that you will need to replace the motor brush holder is a Phillips screwdriver, flat-blade screwdriver, and long-nosed pliers.