My Orders
289702 Briggs and Stratton Engine - Overview
Models starting with 289702
Click on the best match to narrow your results.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$8.95
In Stock
Gasket-float Bowl
Part #281165S
This is a Genuine OEM replacement part used on variety of Lawn and Garden Equipment Engines. This part is made out of Rubber and it is sold individually. If the carburetor is leaking fuel it is recommended to replace the Bowl Gasket. Gaskets and O-rings are a common source of problems. They eventually shrink, causing fuel and air leaks that lead to poor engine performance.
$25.95
Special Order
Float-carburetor
Part #494381
This is a genuine OEM supplied replacement carburetor float designed for lawn and garden equipment engines. This float controls fuel flow into the carburetor bowl by adjusting the needle valve. Includes a plastic float and a metal pin used to secure the float. To complete this repair you would need a wrench and pliers. • Make sure to ...Read moreremove the spark plug • Remove carburetor bowl • Remove old float and secure the new one in place • Re-assemble and test the unit
Read less
$6.95
Special Order
Screw
Part #690278
$69.95
Special Order
Gasket Set-engine
Part #494241
This part is an OEM from Briggs & Stratton. The engine gasket set is composed of cardboard composite gaskets, rubber seals and other components used to seal engine parts. The set is compatible with many lawn tractor engines, and is sold individually. A socket set and a wrench set are needed for making the replacement.
$12.95
Special Order
Engine Oil Seal
Part #291675S
It is a genuine item that is supplied by the original equipment manufacturer for Briggs and Stratton engines commonly installed on a variety of lawn and garden equipment. This is a special component that provides a tight seal for the PTO side of the crankcase. Over time it may wear out and begin to crack eventually requiring a replacement...Read more. Check the appropriate diagrams for your specific model to ensure the correct installation of the new seal-oil. To perform this repair you will need a variety of tools such as a screwdriver, a wrench set, pliers and a tool to pick out the old seal. Make sure to drain the oil before starting this repair. Keep in mind, one durable rubber part is included.
Read less
$31.95
Special Order
Pin-piston/std
Part #299691
This is an authentic replacement part that has been sourced from the original manufacturer to be used with small engines from Briggs & Stratton and Toro. The metal pin is used to connect the connecting rod to the piston assembly. This item is available as an individual replacement part, please see illustrated diagram for associative parts.
$13.95
Special Order
Keeper-valve
Part #494553
$5.95
In Stock
Key-flywheel
Part #222698S
This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Pliers to replace this item.
$11.95
Special Order
Engine Float Valve Needle
Part #231855S
This is a genuine manufacturer approved carburetor needle valve for lawn and garden equipment engines. The needle valve opens and closes to control the flow of fuel into the carburetor. It is made out of metal and it is sold individually. You would need a screwdriver and pliers to complete this repair.
$25.95
Special Order
Bushing-valve Guide
Part #231218
This genuine item is supplied by the original equipment manufacturer for use with engines, generators, lawn mowers, lawn tractors, and snowblowers made by Briggs & Stratton, Toro, Lawn Boy, and Murray. The valve guide bushing is made out of metal. It may require a screwdriver and a wrench during installation. This part will need to be replaced if it breaks. This item is sold individually.
$25.95
Special Order
Pulley-starter
Part #295871
Difficulty pulling the starter rope or a cord that stays extended can result from a damaged recoil pulley. This wheel guides and stores the rope while helping turn the engine during starting. Similar symptoms can come from a frayed rope, seized engine, bent starter housing, broken pawls, or weak return spring, so check those items first. ...Read moreMatch the replacement to the full engine model, type, code, and equipment model. Work on a cool engine with the spark plug lead removed. Release spring tension slowly and keep your face and hands clear of the starter housing. Route the rope correctly, confirm smooth return, and reinstall every guard before starting the engine.
Read less
$6.95
Special Order
Filter-pre Cleaner
Part #272403S
This replacement foam filter element is used on Briggs and Stratton engines installed on lawn and garden equipment. It is an authentic OEM sourced part, not an aftermarket equivalent. This filter adds a second layer of protection against the dust and debris. Please note, the main pleated paper filter is sold separately. No tools are nee...Read moreded to replace this filter. • Remove the cover knob • Remove the filter cover • Take out the old filter • Secure the new one • Secure the filter cover
Read less
Common Symptoms of models starting with 289702
How this model fails, and the parts that fix it.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
replaced worn parts
11 of 19 people
found this instruction helpful.
took old off, put new on
Other Parts Used:
Was this helpful?
Thank you for voting!