2832 (Type 3) Black and Decker Circular Saw - Overview

Genuine DeWalt replacement part. rnIncludes 1 Carbon Brush with wire lead and terminal in rubber sheath attached.rnrn • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are ...Read moreone of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

This brush ring is an OEM from DeWALT. Compatible with mostly saw devices, the plastic brush ring has been designed to secure carbon brushes. This component is fitted onto the magnet ring. A screwdriver and an Allen wrench are needed in the removal and repair. This part is sold individually.

Included in part number 386527-02

This is a genuine replacement part sourced from the original manufacturer for use with cordless trimsaws. The special spindle assembly is used to drive the saw's blade and includes the gear and spindle. This spindle assembly is available as an individual replacement part, please see model diagram for associative parts.

This is an original replacement part manufactured for use with electric power tools. The special sleeve is commonly used to provide spacing between the armature bearing and the motor housing. This sleeve is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine OEM replacement part, it is sold individually. This part is used to keep the brush tight against the armature so the tool will work properly. Over time when the brushes wear down and heat is created, the spring may lose its tension and will have to be replaced.

This is an original replacement part sourced directly from the manufacturer. The lock button is commonly found on DeWALT saws of many varieties. This part is made of high-quality plastic, and is used to engage the spindle lock and keep the blade from spinning. You may require a screwdriver and pliers when replacing this part. This item is sold individually.

This is a genuine replacement part manufactured for use with circular saws. The retaining ring is used to secure the inner blade washer to the spindle shaft. The retaining ring is sold as an individual replacement part.

This genuine replacement part is supplied from original equipment manufacturer for use with trim saws. It is commonly used to secure a saw blade to the spindle-shaft. This bolt is a hex socket head bolt and it is sold individually. To install or remove it you would need a hex key/allen wrench.