280034 (AWGBEUS) LG Air Conditioner - Overview
Sections of the 280034
[Viewing 1 of 1]
Exact Part matches for your search term
[Viewing 1 of 1]
Cap-Electric Starter Pulley
This part number matches the current model number 280034
PartSelect #: PS8938998
Manufacturer #: 280034
No Longer Available
Keep searches simple, eg. "belt" or "pump".
MOTOR ASSEMBLY,DC,INDOOR
PartSelect #: PS7785114
Manufacturer #: 4681A20172Q
This motor powers the fan in your AC’s outdoor unit, helping it cool properly. If your unit isn’t blowing cold air or won’t turn on, this part might be the fix. It’s made to fit specific LG models, so...
$369.71
In Stock
Fan,Propeller
PartSelect #: PS3535139
Manufacturer #: MDG37708601
Keep your system running smoothly with this propeller fan. It helps move air evenly so your space stays comfortable and your unit works efficiently. If you hear strange noises or notice uneven cooling...
$111.78
On Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
LG Mini Split Air Conditioner Error Code CH 46
Remove the main power disconnect. Remove the top cover and the fan-side side panel. Disconnect the thermister from the main circuit board located under top panel. Remove the two thermister sensors from the holders attached to suction piping. Install the new thermisters and reconnect the harness to the circuit board. Reinstall top cover and side panel. Reinstall main power disconnect. Verify that error code has cleared. Operate the system normally.
Parts Used:
-
Malcolm from Mt Pleasant, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
23 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Error CH 46 Suction Pipe Thermistor
Download PDF Multi Air Conditioner SVC Manual for LMU187HV,,, Disconnect the Power,,, Remove cover of the Outdoor Compressor, Remove black cover to the electronics board.. Find the Red Plug-in to the existing Suction Pipe Thermistor, replace with the new one, match each sensor (2) follow the leads one by one, remove the old attach the new ones... Replace covers then the Disconnect & Waa-Laa,,, Fixed
Parts Used:
-
Paula from Yantis, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy motor
Removed front, rear and side panel. matched up connector of old motor to new. unplugged old harness and plugged in new motor before, I installed it to see if it worked. Ran and sounded great. Took old motor off and replaced with new. All good.
Parts Used:
-
Robert from Warwick, RI
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!