This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important ...
This screw is used in refrigerators. The screw can be loosened or tightened with a Phillips-head or square-head screwdriver. This screw is used to secure the refrigerator handle to the refrigerator do...
This door gasket is for the freezer door on the refrigerator. The gasket is grey in color. This part is approximately 34-1/2" wide x 24" long. The door gasket is on the inner door panel and creates a ...
This ice maker is for refrigerators.
Ice maker includes the ice mold and the control device. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Larry
January 7, 2020
Fridge is warm, freezer is cold, the evaporator fan is not running. I replaced the fan and it still does not work. Thinking it could be one of the sensors. Is there a way to test these sensors before replacing them? Thanks.
For model number 25370413415
Hello Larry, Thank you for the question. At 70 degrees the resistance should be 9.3K ohms, 90 degrees would be 7.7K ohms. at 100 degrees would be 6.2K ohms, and 120 degrees would be 4.3K ohms. If the thermistor reads outside of range then it needs replaced. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Linda
October 19, 2022
I can't seem to find a water filter for my fridge, but I found the (Frigidaire ULTRAWF pure source ultra water filter) on Amazon and I was wondering if it would work for my fridge
For model number 25370413415
Hello Linda, thank you for your inquiry. We have researched your model and found the compatible water filter, part number PS479902. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Where is the electronic control board located, there is no plate in back of fridge.
For model number 25370413415
Hi Miguel, Thank you for choosing us for the repair. The Main Board, PartSelect Number PS11731927 on this model is located under the appliance behind the Kick Plate below the doors. Have a great day!
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if the maker dumped the ice into the bin.
pulled fridge from wall, removed card board cover, unplug the fridge. turn the water off to the fridge. remove the water source from fridge first then remove 2 screws that hold the valve. then the wire plugs. hoses.. they were color coded.