25370349412 Kenmore Refrigerator - Overview

Hello Margaret, thank you for writing in. Our research has found, part number PS479902 is the replacement water filter for your model. We also found some installation instructions for you. To Replace your Kenmarepure! TM Water Filter: 29 It is not necessary to turn the water supply off to change the filter. Be ready to wipe up any small amounts of water released during the filter replacement. 1. Turn Off the ice maker power switch. 2. Remove the filter by pushing on the end/ face of the filter. 3. Slide the old water filter cartridge straight out of the housing and discard it. 4. Unpackage the new filter cartridge. Using the alignment guide, slide it gently into the filter housing until it stops against the snapin connector at the back of the housing. 5. Push firmly until the cartridge snaps into place (you should hear a click as the cartridge engages the snap-in connector). 6. Pressa drinking glass against the water dispenser while checking for any leaks at the filter housing. Any spurts and sputters that occur as the system purges air out of the dispenser system are normal. 7. After filling one glass of water, continue flushing the system for about four minutes. 8. Turn On the ice maker. 9. Press and hold the Water Filter button on the Ice & Water Dispenser control panel for three seconds. When the display changes from Red to Green, the status has been reset. We hope this helps.