All Installation Instructions for Kenmore Refrigerator 25360309410

Light Socket short

- Unsnapped old light socket from top of Frig
- Disconnected elect wires
- Reconnected elect wires to new light socket
- Snapped new socket in place
- Done in less than 2 min.

Parts Used:

Light Socket

Rebecca from Gautier, MS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

22 of 31 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the shelf bar broke

I popped the new one in. My cat could have done it

Parts Used:

Door Rack - White

Jeff from New Yrok, NY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

18 of 21 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I slammed the door on the pan severely cracking it.

All I did was to take out the cracked pan and slide in the new one.Excellent service.I ordered the pan late evening one day the part arrrived not the next day but the day after.I expected that it would have taken a week or better.I recommend Part Select.com because of this.

Parts Used:

Crisper Drawer

Thomas from Farmingdale, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

20 of 29 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

cracked bottom hinge

My 4 year old grandson used the frig door as a swing.The bottom hinge cracked, then the door wouldn't seal. I propped the door up with some books, removed the broken hinge (2 bolts) and replaced with the new part. Simple fix on the door, only time will fix the 4 year old!

Parts Used:

Lower Hinge Bracket

LEE from LEO, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

14 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Rack door brackets broke

I snapped the parts into place. The fact that the parts I recieved were original parts from Frigidaire made all the difference. I feel if the parts had been after market parts they would not have fit so well.

Parts Used:

Door Rack

John from yonkers, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven light bulb went dark; it needed replacing

Twisted replacement bulb into place easily. Let there be light!

Parts Used:

Light Bulb

Lise from CEDAR GROVE, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

9 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Missing door rack

Just snapped them into place without any problems! The parts were exactly what I was looking for.

Parts Used:

Door Rack

Bryan from Minneapolis, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

6 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

door rack broke in half

opened thepackage snapped in place .took all of 3 minutes

Parts Used:

Door Rack

Roberta from Port William, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Coming from the refrigerator, there was an intermittent "clicking noise", occurring about every 30 seconds. The frig. eventually failed .

I removed the back cover and removed the clip holding the compressor- run capacitor and start relay. I replaced these 2 components and clean the dust from the frig., and from the bottom of the floor. I replaced the back cover ; Loss about $300 worth of meat when when the frig. failed. Then I thought that, during these turbulent times, there are many which don't have a refrigerator or any meat to place in it, The refrigerator is "running" normal again.

Parts Used:

Run Capacitor - 120V

winifred from LOUISVILLE, KY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Refrigerator Light bulb went out

I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.

Parts Used:

Light Bulb

ANGELA from MEBANE, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

5 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken lower door rack

Snapped the new rack right into place.

Parts Used:

Door Rack

Keith from Fort Thomas, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The original part was plastic/and broke

unscrewed to little bolts and installed the new/metal part we got rfom partselect.If we may say.this is a great company to buy from! Fast!

Parts Used:

Upper Hinge

John from Lancaster, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Crisper Drawer in Fridge was cracked

Ordered a new one and simply slid it into place

Parts Used:

Crisper Drawer

Linda from INVERNESS, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The refrigerator door did not come for the opening swing to be reversed

I ordered four bearing hinges and drill holes for the hinges on top and bottom of frezer and fridge doors insert the bearing hinges on the holes and all the other part on the door were able to reversed.

Parts Used: