25360085613 Kenmore Refrigerator - Overview

This manufacturer-certified Door Shelf Retainer Bar, sometimes otherwise known as the door rack or bar retainer, is a white, plastic part which can be easily installed onto the inside of the refrigerator or freezer door to hold items on the door shelves. It holds items in your fridge and will show physical damage if broken or warped, at...Read more which time it should be replaced. Check your user manual and model number to see if this part is right for you. No tools are required for this installation, the part should simply snap into place. This part measures roughly 25 inches wide, 3 inches high, and 5 inches deep. This part is sold individually, and we recommend checking the other door shelf retaining bars on your refrigerator or freezer at the same time as ordering this part to ensure that no others need to be replaced, as they often wear or warp at similar speeds.

The Door Shelf Retainer Bar, also known as a refrigerator door rack, is a white, plastic part which can be easily installed onto your fridge door. It holds items in your fridge and will show physical damage if broken, at which time it should be replaced. Check your user manual and model number to see if this part is right for you. To ins...Read moretall this part, you will need to remove the old one by unlocking the tabs, which can be slid with your fingers. To install the new shelf, line it up with the shelf cut-outs, over the tabs, and gently press it down to lock it into place. This part generally fits the middle door shelf of refrigerators. This is a part that frequently requires multiple parts per refrigerator. Because it is sold individually, you will need to purchase as many door racks as necessary to complete your repair.

This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside your appliance. Installation is simple—just unscrew the old bulb and replace it with the new one. If the existing bulb is broken, disconnect p...Read moreower and use needle-nose pliers to safely remove the remaining base. Sold individually, this bulb is a commonly replaced part—consider keeping a spare on hand.

This screw is used in refrigerators. The screw can be loosened or tightened with a Phillips-head or square-head screwdriver. This screw is used to secure the refrigerator handle to the refrigerator door. This is an OEM part sourced directly from the manufacturer.

Keep your produce fresh and your refrigerator organized with this crisper pan cover, which includes the frame and insert. Positioned above the crisper drawer, it helps regulate humidity to prevent premature wilting of fruits and vegetables. The cover also protects drawer contents from spills and contributes to the overall structure of the...Read more refrigerator interior. This part is designed to fit select models—please verify compatibility before purchase.

If the back edge of your fridge shelf is missing a piece or looks worn out, this rear shelf trim is what you need. It’s about 24 inches long and 1 inch wide, made of sturdy white plastic, and fits right onto the back of the shelf. It helps keep things stable and gives your fridge a clean look. This updated part might look a little differe...Read morent from your old one, but it works just the same. No tools needed—just snap it into place.

The run capacitor is attached to the compressor. This part is 120 volts and 15 mfd. The run capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. If your refrigerator is too warm, will not start, or your freezer section is too warm, you may need to replace this part....Read more This is a genuine OEM part. Please remember to disconnect power to your refrigerator before starting your repair.

This transparent plastic dairy door is designed to cover the dairy compartment in your refrigerator, helping to keep items like butter and cheese neatly stored and easily accessible. Measuring approximately 10 inches wide and 6 inches long, it offers a snug fit and a clean look. The lid lifts smoothly to access the contents inside, and in...Read morestallation is tool-free—simply clip the door into the hinged slots on the refrigerator. If your current dairy door is cracked or missing, this replacement offers a quick and simple way to restore functionality and maintain organization in your fridge.

Keep your fridge neat and tidy with this white front shelf trim. It snaps onto the front edge of your shelf to help keep items in place and adds a polished look to your refrigerator interior. Whether you're replacing a broken piece or refreshing your fridge’s appearance, this trim is a simple fix that makes a big difference. Designed to fit a range of models—just check yours before ordering. Sold individually.

This the just the glass. The frame is NOT included.

This door hinge bushing, or hinge bearing, is a genuine OEM replacement part for your refrigerator. The hinge bearing helps the refrigerator door stay on track when opening and closing, ensuring it is flush with the cabinet when closed. You will need a screwdriver and a ratchet in order to complete this repair.

Improve door function and alignment with this hinge nylon washer, designed to support the door as it pivots on the hinge pin. Made from durable nylon, it helps reduce friction and noise while ensuring smooth opening and closing. By maintaining proper door positioning, it supports a secure seal and contributes to efficient operation and consistent cooling performance.