25351694102 Kenmore Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Crisper Cover Support - Front – Part Number: 241993101
$16.27
In Stock
Crisper Cover Support - Front
★★★★★
★★★★★
(17)
Part #241993101
This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can be used for the front and the rear support, as designed by the manufacturer, and mounts to the inside cabinet wall. Replacing this part is an easy repair, and will require a small flat blade screwdriver, a putty knife, and a soft hammer. Remove the crisper and shelf from the refrigerator before replacing the support. The crisper cover front support is held in place with a locking pin. To remove the old part, you will first need to push the pin into the interior of the cabinet using the screwdriver, and then you can pull the support out with a putty knife. If you cannot get the pin out you can use a flat-blade screwdriver to push it down and out of sight and it will not harm anything in your refrigerator After removing the pin and attaching the new support, simply use the soft hammer to lock the new pin in place.
Bottom Door Bin – Part Number: 240323002
$87.95
In Stock
Bottom Door Bin
★★★★★
★★★★★
(25)
Part #240323002
The Bottom Door Bin is also commonly known as a "cantilever shelf" is a clear plastic drawer which holds items in the bottom area of your fridge's interior, on the door. This OEM part is very easy to install and will not require any tools, you will just need to snap the mounting tabs into place for removal and installation. If damaged you will notice visible damage or have problems holding items in the fridge. If damaged, it should be replaced. Check your model number and user manual to see if this is the right part for you. This is important, as many fridges use multiple door bins, many of which vary slightly. This part is sold individually.
Crisper Support - Rear – Part Number: 241993001
$22.95
In Stock
Crisper Support - Rear
★★★★★
★★★★★
(4)
Part #241993001
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to the inside cabinet wall. If there is visible damager or your crisper stops fitting properly, it may be time to replace the part. Check your user manual and model number to ensure this part is what you need. Replacing the rear crisper support in your refrigerator is an easy job. This part is made from plastic and mounts on the inside of the wall. To complete this repair you will need a small putty knife, a punch or a short flat blade screwdriver, and a small hammer. You may need to replace your rear crisper support if you find that the door will not open or close. In order to complete this repair, you will need to remove all the shelves above the crisper in order to have ample room to work. It is also good to have duct tape on hand, which can be used to protect the liner around the support. This part is sold individually. Please note that the rear and front crisper support are different parts; this is the one you are looking for if it is your rear support that needs replacing.
Meat Drawer Rail - Right Side – Part Number: 240356501
$69.57
In Stock
Meat Drawer Rail - Right Side
★★★★★
★★★★★
(23)
Part #240356501
This replacement drawer slide rail is for the right-hand side of your refrigerator. This part attaches to the inside wall of your refrigerator to support the sliding crisper drawer. If the rail is broken or the drawer is not sliding properly, you will need to replace the slide rail. You will need a Phillips screwdriver to complete this repair.
Refrigerator Water Inlet Valve – Part Number: 242252702
$104.89
In Stock
Refrigerator Water Inlet Valve
★★★★★
★★★★★
(54)
Part #242252702
This part releases water from the supply line when it's activated. NOTE: This part may appear different than the original, but is an authorized manufacturer replacement.
Hinge Bearing – Part Number: 240328201
$36.95
In Stock
Hinge Bearing
★★★★★
★★★★★
(13)
Part #240328201
Sold individually. Also known as a short door closing cam.
Door Closing Cam – Part Number: 240457701
$69.57
In Stock
Door Closing Cam
★★★★★
★★★★★
(9)
Part #240457701
Sold individually. This cam is located at the bottom of the fridge/freezer door.
Light Bulb – Part Number: 316538904
$35.95
In Stock
Light Bulb
★★★★★
★★★★★
(9)
Part #316538904
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside your appliance. Installation is simple—just unscrew the old bulb and replace it with the new one. If the existing bulb is broken, disconnect power and use needle-nose pliers to safely remove the remaining base. Sold individually, this bulb is a commonly replaced part—consider keeping a spare on hand.
Defrost Thermostat Kit – Part Number: 5303918214
$48.80
In Stock
Defrost Thermostat Kit
★★★★★
★★★★★
(17)
Part #5303918214
This kit includes the clip, leads and one heat shrink.
Upper Crisper Drawer Cover - Glass NOT Included – Part Number: 240350702
$57.15
In Stock
Upper Crisper Drawer Cover - Glass NOT Included
★★★★★
★★★★★
(18)
Part #240350702
This genuine upper crisper drawer cover frame is designed to support your refrigerator?s upper crisper drawer and allow for smooth opening and closing. It features built-in glides for proper drawer alignment but does not include the glass insert. There are two large crisper drawers towards the bottom of the appliance. This part covers the upper large crisper drawer, not the deli pan.
Meat Pan Rail - Left Side - White – Part Number: 240349701
$70.26
In Stock
Meat Pan Rail - Left Side - White
★★★★★
★★★★★
(1)
Part #240349701
Mounting screws NOT included.
Door Shelf – Part Number: 240351601
$65.26
In Stock
Door Shelf
★★★★★
★★★★★
(3)
Part #240351601
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide. It can be used in the freezer or refrigerator and is very easy to repair. All you need to do is snap the new door bin into place, which requires no tools. This part is sold individually and not as part of a set, even though your refrigerator may take more than one of this part.

Manuals & Care Guides for 25351694102

Click to download

Common Symptoms of the 25351694102

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
water leaking out of refrigerator
608 of 723 people found this instruction helpful.
  • Jose from Alexandria, VA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Wrench (Adjustable)
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Was this helpful?
Thank you for voting!
Tab on bottom door bin broke off
541 of 573 people found this instruction helpful.
  • Mark from Redlands, CA
  • Really Easy
  • Less than 15 mins
Replaced bottom door bin being careful not to put stress on the tabs to fit into molded area in door.
Was this helpful?
Thank you for voting!
freezer shelf broke
506 of 533 people found this instruction helpful.
  • MONICA from LANCASTER, CA
  • Really Easy
  • Less than 15 mins
Easy slide it back in place
Was this helpful?
Thank you for voting!