247889700 Craftsman Snow Blower - Overview

Diagrams for 247889700

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Snow Blower Oil Seal – Part Number: 721-0327
No Longer Available
Snow Blower Oil Seal
Part #721-0327
ROD GOVERNOR – Part Number: 751P10665A
No Longer Available
ROD GOVERNOR
Part #751P10665A
OIL SEAL – Part Number: 751P11370A
No Longer Available
OIL SEAL
Part #751P11370A
CAM-CLUTCH LOCK – Part Number: 731-04896C
No Longer Available
CAM-CLUTCH LOCK
Part #731-04896C
BRACKET-GDE-CBL-CL – Part Number: 790-03997
No Longer Available
BRACKET-GDE-CBL-CL
Part #790-03997
DOWEL PIN – Part Number: 715-04088A
No Longer Available
DOWEL PIN
Part #715-04088A
AUGER ENGAGE, RED – Part Number: 684-04111D
No Longer Available
AUGER ENGAGE, RED
Part #684-04111D
Pivot Bolt – Part Number: 71-04902
No Longer Available
Pivot Bolt
Part #71-04902
Hex Shaft, .8125, 7-Tooth – Part Number: 914-04209A
No Longer Available
Hex Shaft, .8125, 7-Tooth
Part #914-04209A
Carburetor Assembly – Part Number: 951-10938
No Longer Available
Carburetor Assembly
Part #951-10938
Label – Part Number: 777S32236
No Longer Available
Label
Part #777S32236
PULLEY-HALF-A 2.76 – Part Number: 756-06563
No Longer Available
PULLEY-HALF-A 2.76
Part #756-06563

Common Symptoms of the 247889700

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Original shave plate badly worn
12 of 25 people found this instruction helpful.
  • John from HARRISVILLE, NH
  • Really Easy
  • Less than 15 mins
  • Wrench set
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, app ly heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Was this helpful?
Thank you for voting!
The chute rotation assembly was stuck
4 of 6 people found this instruction helpful.
  • Ralph from SALT LAKE CTY, UT
  • Very Difficult
  • More than 2 hours
  • Pliers, Screw drivers, Socket set, Wrench (Adjustable)
I ordered a replacement chute rotation gearbox. The small metal ball on the end of the cable (on the replacement part) was attached about 1/8" too long and made it so that there was too much play in the trigger that operates it. Thus, the replacement part did not work. I called customer service for directions about returning the part. They said it must have been defective. I'm still waiting for instructions about returning it for a refund. The whole thing was a bust. I ended up disassembling the old gearbox and fixing it, instead of replacing it (which would have been my preference). The replacement part did not work at all!
Was this helpful?
Thank you for voting!