24788771 Craftsman Snow Blower - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Screw 2Pk – Part Number: STD523717
No Longer Available
Screw 2Pk
Part #STD523717
Screw 5Pk – Part Number: STD522515
No Longer Available
Screw 5Pk
Part #STD522515
Carriage Bolt – Part Number: STD533107
No Longer Available
Carriage Bolt
Part #STD533107
Snow Blower Oil Seal – Part Number: 721-0327
No Longer Available
Snow Blower Oil Seal
Part #721-0327
CAM-CLUTCH LOCK – Part Number: 731-04896C
No Longer Available
CAM-CLUTCH LOCK
Part #731-04896C
BRACKET-GDE-CBL-CL – Part Number: 790-03997
No Longer Available
BRACKET-GDE-CBL-CL
Part #790-03997
WASHER-FLAT – Part Number: 42828
No Longer Available
WASHER-FLAT
Part #42828
ROLLER GAGE FRONT – Part Number: 42838
No Longer Available
ROLLER GAGE FRONT
Part #42838
HEX SHAFT, .8125, 7-TOOTH – Part Number: 917-04209B
No Longer Available
HEX SHAFT, .8125, 7-TOOTH
Part #917-04209B
Flat Washer, .375 X .738 X .063 – Part Number: 926-0185
No Longer Available
Impeller Assembly. 12" – Part Number: 687-04057A
No Longer Available
Impeller Assembly. 12"
Part #687-04057A
Worm Gear 20T, 28" 7 30" – Part Number: 917-10528A
No Longer Available
Worm Gear 20T, 28" 7 30"
Part #917-10528A

Manuals & Care Guides for 24788771

Click to download

Common Symptoms of the 24788771

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Original shave plate badly worn
12 of 25 people found this instruction helpful.
  • John from HARRISVILLE, NH
  • Really Easy
  • Less than 15 mins
  • Wrench set
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, app ly heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Was this helpful?
Thank you for voting!
The chute rotation assembly was stuck
4 of 6 people found this instruction helpful.
  • Ralph from SALT LAKE CTY, UT
  • Very Difficult
  • More than 2 hours
  • Pliers, Screw drivers, Socket set, Wrench (Adjustable)
I ordered a replacement chute rotation gearbox. The small metal ball on the end of the cable (on the replacement part) was attached about 1/8" too long and made it so that there was too much play in the trigger that operates it. Thus, the replacement part did not work. I called customer service for directions about returning the part. They said it must have been defective. I'm still waiting for instructions about returning it for a refund. The whole thing was a bust. I ended up disassembling the old gearbox and fixing it, instead of replacing it (which would have been my preference). The replacement part did not work at all!
Was this helpful?
Thank you for voting!
badly worn shave plate
2 of 4 people found this instruction helpful.
  • James from FRANKLIN, MA
  • Really Easy
  • Less than 15 mins
  • Socket set
unbolt plate and swap over new plate
Was this helpful?
Thank you for voting!