247529180 Craftsman Snow Blower - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Screw 5Pk – Part Number: STD522515
No Longer Available
Screw 5Pk
Part #STD522515
Snow Blower Oil Seal – Part Number: 721-0327
No Longer Available
Snow Blower Oil Seal
Part #721-0327
CAM-CLUTCH LOCK – Part Number: 731-04896C
No Longer Available
CAM-CLUTCH LOCK
Part #731-04896C
BRACKET-GDE-CBL-CL – Part Number: 790-03997
No Longer Available
BRACKET-GDE-CBL-CL
Part #790-03997
HEX SHAFT, .8125, 7-TOOTH – Part Number: 917-04209B
No Longer Available
HEX SHAFT, .8125, 7-TOOTH
Part #917-04209B
Wing Nut Knob – Part Number: 750-04072A
No Longer Available
Wing Nut Knob
Part #750-04072A
Hex Bolt – Part Number: 47600
No Longer Available
Hex Bolt
Part #47600
Cable Bracket – Part Number: 27584
No Longer Available
Cable Bracket
Part #27584
PULLEY-HALF-A 2.76 – Part Number: 756-06563
No Longer Available
PULLEY-HALF-A 2.76
Part #756-06563
CHUTE-UPPER W/LBL – Part Number: 731-04426C
No Longer Available
CHUTE-UPPER W/LBL
Part #731-04426C
BRACKET-ROTATE GEAR – Part Number: 790-00342C
No Longer Available
BRACKET-ROTATE GEAR
Part #790-00342C
WHEEL-COMP-16X6.50 – Part Number: 634Z07696-0662
No Longer Available
WHEEL-COMP-16X6.50
Part #634Z07696-0662

Common Symptoms of the 247529180

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Original shave plate badly worn
12 of 25 people found this instruction helpful.
  • John from HARRISVILLE, NH
  • Really Easy
  • Less than 15 mins
  • Wrench set
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, app ly heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Was this helpful?
Thank you for voting!
badly worn shave plate
2 of 4 people found this instruction helpful.
  • James from FRANKLIN, MA
  • Really Easy
  • Less than 15 mins
  • Socket set
unbolt plate and swap over new plate
Was this helpful?
Thank you for voting!