247380310 Craftsman Lawn Mower - Overview

Diagrams for 247380310

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bell Blade Support – Part Number: 736-0524B-1
$7.44
Special Order
Bell Blade Support
Part #736-0524B-1
Bell Blade Support
Hinged Mulch Plug – Part Number: 687-06029
No Longer Available
Hinged Mulch Plug
Part #687-06029
This is an original part from Craftsman for use with Lawn Mowers. The mulching plug, when installed in the grass-discharge chute, converts the mower to mulching mode. The most common reason for replacing the mulch cover is if it is damaged. This part is sold individually. The tool that you will need to replace the mulching plug is a 3/8" nut driver.
Engine – Part Number: N/P
No Longer Available
Engine
Part #N/P
Decal – Part Number: 777S33350
No Longer Available
Decal
Part #777S33350
Decal – Part Number: 777S33353
No Longer Available
Decal
Part #777S33353
AXLE CVR-REPLACEME – Part Number: 753-11462
No Longer Available
AXLE CVR-REPLACEME
Part #753-11462
BAFFLE ASM-RR DOOR – Part Number: 631-08159
No Longer Available
BAFFLE ASM-RR DOOR
Part #631-08159

Questions And Answers for 247380310

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul - For model number 247.380310
May 12, 2026
I need a new gas tank cap and cap gasket
Chris Boyle Profile
Hello Paul, thank you for reaching out. The fuel tank cap for your model is part number PS12634912, and the cap gasket comes as a part with the fuel tank cap. We hope this helps!
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 247380310

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
I replaced the deck on my Craftsman Lawn Mower, and needed a new water nozzle and some screws to hold the front wheel assembly on.
2 of 4 people found this instruction helpful.
  • Dan from LAKEWOOD, OH
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
I removed the rear wheels, then I removed the blade, then the motor, then the front wheel assembly. The bolts holding the front wheel assembly were rusted and rounded trying to remove them, so I cut them out with a grinder. Afterwards I removed the remainder of the screw with a pair of pliers. I also removed the Water jet cleanout nozz le, found it was cracked, ordered the part from PartSelect, along with the screws needed to attach the front wheel assembly. I cleaned the remaining parts and re installed them onto the new deck. First, I installed the front wheel assembly, then the motor, then sat the mower upright, installed the blade, then took the rear wheel assembly and aligned it and fastened it to the deck. Last piece was the water nozzle. I placed it in the recess for it, and fastened it with the bolt. Then I tested the mower, and it worked without issue. Afterwards I used the new clean out port to rinse the underside of the deck, and it worked well.
Was this helpful?
Thank you for voting!
Lost wing knob and nut that holds the handle onto the mower
5 of 25 people found this instruction helpful.
  • Paul from NIXA, MO
  • Very Difficult
  • More than 2 hours
Can't do the repair. You sent me the two wing knobs I ordered, but no nuts. No one sells the nuts. I've driven all over trying to find them. Wasted my money and a lot of time. Zip ties are holding the handle on. I sent an email to customer service asking for the nuts, never heard a word from anyone. Another great example of how no t to run a business.
Was this helpful?
Thank you for voting!