247289060 Craftsman Lawn Tractor - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bulb – Part Number: 4152J
No Longer Available
Bulb
Part #4152J
Steering Block – Part Number: 748-04278
No Longer Available
Steering Block
Part #748-04278
ARM-DECK LIFT LH – Part Number: 783-04711C
No Longer Available
ARM-DECK LIFT LH
Part #783-04711C
COVER-BELT DECK 42 – Part Number: 783-06424A
No Longer Available
COVER-BELT DECK 42
Part #783-06424A
BRACKET-IDLER SUPPORT – Part Number: 783-06643
No Longer Available
BRACKET-IDLER SUPPORT
Part #783-06643
Muffler-b&s Single – Part Number: 951-05956B
No Longer Available
Muffler-b&s Single
Part #951-05956B
It is a genuine OEM sourced replacement muffler with a welded exhaust pipe, it is commonly installed on the gas-powered lawn and garden equipment. Its purpose is to soften the noise coming from the engine, over time it may get get clogged or damaged eventually requiring a replacement. It is specially manufactured to meet the EPA exhaust regulations. This high-quality component is made of durable metal and it is sold individually, please note the hardware to secure the it and the gaskets are all sold separately.
BELT-V50DECK DR – Part Number: 954-04240
No Longer Available
BELT-V50DECK DR
Part #954-04240
Bracket, Lift, Man Pto, 6 Pos – Part Number: 782-06443
No Longer Available
Automatic Fender – Part Number: 783-06259
No Longer Available
Automatic Fender
Part #783-06259
Bracket Stabilizer – Part Number: 783-06312
No Longer Available
Bracket Stabilizer
Part #783-06312
Arm, Lift, 42-In. Rt Right Hand – Part Number: 782-04494C
No Longer Available
Off Deck Assembly – Part Number: 983-04578
No Longer Available
Off Deck Assembly
Part #983-04578
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
upper transmission belt cracked bad
6 of 7 people found this instruction helpful.
  • William from TRIANGLE, VA
  • Easy
  • 30 - 60 mins
  • Pliers, Wrench set
Removed battery, then battery hanger brackets.
Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley.
put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal.
Getting the t ension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring.
cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
Mixer began to make a noise on speed two and higher
8 of 31 people found this instruction helpful.
  • LISA M from BATESVILLE, AR
  • Really Easy
  • Less than 15 mins
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do es not make the slight howl sound.
Was this helpful?
Thank you for voting!
Blade got bend after hit a stump so had to buy new spindle shaft
6 of 27 people found this instruction helpful.
  • Randall from GALLIPOLIS, OH
  • Very Easy
  • Less than 15 mins
  • Socket set
The repair was a very easy.
Was this helpful?
Thank you for voting!