247288850 Craftsman Lawn Tractor - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Steering Block – Part Number: 748-04278
No Longer Available
Steering Block
Part #748-04278
BRKT-VARIABLE AUTO – Part Number: 783-06587A
No Longer Available
BRKT-VARIABLE AUTO
Part #783-06587A
TANK-FUEL 1.36 GA – Part Number: 751-0555D
No Longer Available
TANK-FUEL 1.36 GA
Part #751-0555D
LENS-RH CRAFTSMAN – Part Number: 731P07458
No Longer Available
LENS-RH CRAFTSMAN
Part #731P07458
LENS-LH CRAFTSMAN – Part Number: 731P07459
No Longer Available
LENS-LH CRAFTSMAN
Part #731P07459
Muffler-b&s Single – Part Number: 951-05956B
No Longer Available
Muffler-b&s Single
Part #951-05956B
It is a genuine OEM sourced replacement muffler with a welded exhaust pipe, it is commonly installed on the gas-powered lawn and garden equipment. Its purpose is to soften the noise coming from the engine, over time it may get get clogged or damaged eventually requiring a replacement. It is specially manufactured to meet the EPA exhaust regulations. This high-quality component is made of durable metal and it is sold individually, please note the hardware to secure the it and the gaskets are all sold separately.
Idler Pulley – Part Number: 753-08068
No Longer Available
Idler Pulley
Part #753-08068
Decal – Part Number: 777D30018
No Longer Available
Decal
Part #777D30018
Engine – Part Number: N/P
No Longer Available
Engine
Part #N/P
Pulley, idlr, flat 7.25 od – Part Number: 959-04002
No Longer Available
Pulley, idlr, flat 7.25 od
Part #959-04002
Lawn tractor deck housing – Part Number: 983-04578A-0637
No Longer Available
Lawn tractor deck housing
Part #983-04578A-0637
Wet battery – Part Number: 725-05090
No Longer Available
Wet battery
Part #725-05090
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oil Drain Sleeve
8 of 13 people found this instruction helpful.
  • Laurie from RICHLANDS, NC
  • Very Easy
  • Less than 15 mins
  • Pliers, Socket set, Wrench (Adjustable), Wrench set
I wish this was longer...it's only about 6", barely enough to have the oil flow past the metal plate of the riding lawnmower. I'm going to figure out a way to make a permanent extension something like this video would be SO much better https://www.youtube.com/watch?v=G9ZVoeqr6R8&t=79s
Was this helpful?
Thank you for voting!
upper transmission belt cracked bad
6 of 7 people found this instruction helpful.
  • William from TRIANGLE, VA
  • Easy
  • 30 - 60 mins
  • Pliers, Wrench set
Removed battery, then battery hanger brackets.
Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley.
put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal.
Getting the t ension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring.
cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
Blade got bend after hit a stump so had to buy new spindle shaft
6 of 27 people found this instruction helpful.
  • Randall from GALLIPOLIS, OH
  • Very Easy
  • Less than 15 mins
  • Socket set
The repair was a very easy.
Was this helpful?
Thank you for voting!