247288840 Craftsman Lawn Tractor - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Steering Block – Part Number: 748-04278
No Longer Available
Steering Block
Part #748-04278
BRKT-VARIABLE AUTO – Part Number: 783-06587A
No Longer Available
BRKT-VARIABLE AUTO
Part #783-06587A
TANK-FUEL 1.36 GA – Part Number: 751-0555D
No Longer Available
TANK-FUEL 1.36 GA
Part #751-0555D
LENS-RH CRAFTSMAN – Part Number: 731P07458
No Longer Available
LENS-RH CRAFTSMAN
Part #731P07458
LENS-LH CRAFTSMAN – Part Number: 731P07459
No Longer Available
LENS-LH CRAFTSMAN
Part #731P07459
Muffler-b&s Single – Part Number: 951-05956B
No Longer Available
Muffler-b&s Single
Part #951-05956B
It is a genuine OEM sourced replacement muffler with a welded exhaust pipe, it is commonly installed on the gas-powered lawn and garden equipment. Its purpose is to soften the noise coming from the engine, over time it may get get clogged or damaged eventually requiring a replacement. It is specially manufactured to meet the EPA exhaust regulations. This high-quality component is made of durable metal and it is sold individually, please note the hardware to secure the it and the gaskets are all sold separately.
Engine – Part Number: 31P677-3373-G2
No Longer Available
Engine
Part #31P677-3373-G2
Engine – Part Number: 31P677-3373-G6
No Longer Available
Engine
Part #31P677-3373-G6
Idler Pulley – Part Number: 753-08068
No Longer Available
Idler Pulley
Part #753-08068
Wiring harness – Part Number: 925-04567F
No Longer Available
Wiring harness
Part #925-04567F
Decal – Part Number: 777Z44365
No Longer Available
Decal
Part #777Z44365
Pin, cotter, 5/32, 1.25 – Part Number: 717-04039A
No Longer Available
Pin, cotter, 5/32, 1.25
Part #717-04039A
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
1 deck belt cover fell off and the other rusted and loosening
9 of 11 people found this instruction helpful.
  • J. Alonzo from TULALIP, WA
  • Very Easy
  • 15 - 30 mins
  • Socket set
Removed the retaining screws on both belt covers and replaced them with the new ones i purchased.
Was this helpful?
Thank you for voting!
Belt guards broken
7 of 8 people found this instruction helpful.
  • Jerry from GRAND BAY, AL
  • Very Easy
  • Less than 15 mins
  • Wrench (Adjustable)
Replaced belt guards. Bended in center plates to keep the belts from slipping off. Works like a charm
Was this helpful?
Thank you for voting!
upper transmission belt cracked bad
6 of 7 people found this instruction helpful.
  • William from TRIANGLE, VA
  • Easy
  • 30 - 60 mins
  • Pliers, Wrench set
Removed battery, then battery hanger brackets.
Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley.
put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal.
Getting the t ension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring.
cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!
Was this helpful?
Thank you for voting!