24725111 Craftsman Lawn Tractor - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Engine Filter – Part Number: 298090S
$6.95
In Stock
Engine Filter
Part #298090S
This is a genuine OEM sourced replacement part, it is made out of plastic with filter material inside. It is sold individually and is used on a variety of lawn and garden engines. This is an fuel filter for engines with a fuel pump which makes sure that the fuel delivered to the engine is free of any debris or contaminants. It will over time become clogged and restrict the fuel getting to the engine so it will need to be replaced.
Screw 2Pk – Part Number: STD523717
No Longer Available
Screw 2Pk
Part #STD523717
Washer 8Pk – Part Number: STD551025
No Longer Available
Washer 8Pk
Part #STD551025
Screw 5Pk – Part Number: STD523110
No Longer Available
Screw 5Pk
Part #STD523110
This is an authentic replacement part sourced directly from the manufacturer. The screw is commonly found in Craftsman machines, such as lathes, air compressors, sprayers, and snowblowers. This is a set of five metal screws, which may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item.
Steering Block – Part Number: 748-04278
No Longer Available
Steering Block
Part #748-04278
ARM-DECK LIFT LH – Part Number: 783-04711C
No Longer Available
ARM-DECK LIFT LH
Part #783-04711C
COVER-BELT DECK 42 – Part Number: 783-06424A
No Longer Available
COVER-BELT DECK 42
Part #783-06424A
BRACKET-IDLER SUPPORT – Part Number: 783-06643
No Longer Available
BRACKET-IDLER SUPPORT
Part #783-06643
Low Back Seat, Black, Figure B – Part Number: 757-05230
No Longer Available
Low Back Seat, Black, Figure B
Part #757-05230
This is a genuine replacement part manufactured for use with riding lawnmowers. The cushioned seat is connected to the pivot seat manual adjust bracket and is used as the operators seat. This seat is one of several styles of seats and this seat features the low back design. The low back seat is available as an individual replacement part, please see model diagram for associative parts.
BRACKET-FRAME SEAT – Part Number: 783-04548D
No Longer Available
BRACKET-FRAME SEAT
Part #783-04548D
Muffler-b&s Single – Part Number: 951-05956B
No Longer Available
Muffler-b&s Single
Part #951-05956B
It is a genuine OEM sourced replacement muffler with a welded exhaust pipe, it is commonly installed on the gas-powered lawn and garden equipment. Its purpose is to soften the noise coming from the engine, over time it may get get clogged or damaged eventually requiring a replacement. It is specially manufactured to meet the EPA exhaust regulations. This high-quality component is made of durable metal and it is sold individually, please note the hardware to secure the it and the gaskets are all sold separately.
Shoulder Screw, 1/4-20 X 0.50 – Part Number: 783-04278
No Longer Available
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oil Drain Sleeve
8 of 13 people found this instruction helpful.
  • Laurie from RICHLANDS, NC
  • Very Easy
  • Less than 15 mins
  • Pliers, Socket set, Wrench (Adjustable), Wrench set
I wish this was longer...it's only about 6", barely enough to have the oil flow past the metal plate of the riding lawnmower. I'm going to figure out a way to make a permanent extension something like this video would be SO much better https://www.youtube.com/watch?v=G9ZVoeqr6R8&t=79s
Was this helpful?
Thank you for voting!
Bent the old one on a stump
2 of 4 people found this instruction helpful.
  • George from BAY VILLAGE, OH
  • Really Easy
  • Less than 15 mins
  • Socket set
Removed one 1/2" bolt to remove old part .
Slipped new part in place. put bolt in open loop and tightened.
Was this helpful?
Thank you for voting!
light switch broken
2 of 7 people found this instruction helpful.
  • GINO from MURRAY, KY
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Wrench (Adjustable)
Had to pull stove out of the way for easier replacement of the hood switch. Exact replacement part was simple to change.
Was this helpful?
Thank you for voting!