247203741 Craftsman Lawn Tractor - Overview

Diagrams for 247203741

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer 8Pk – Part Number: STD551025
No Longer Available
Washer 8Pk
Part #STD551025
Bulb – Part Number: 4152J
No Longer Available
Bulb
Part #4152J
Screw 5Pk – Part Number: STD523110
No Longer Available
Screw 5Pk
Part #STD523110
This is an authentic replacement part sourced directly from the manufacturer. The screw is commonly found in Craftsman machines, such as lathes, air compressors, sprayers, and snowblowers. This is a set of five metal screws, which may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item.
Steering Block – Part Number: 748-04278
No Longer Available
Steering Block
Part #748-04278
BRKT-VARIABLE AUTO – Part Number: 783-06587A
No Longer Available
BRKT-VARIABLE AUTO
Part #783-06587A
Retainer Plate – Part Number: 783P08577A
No Longer Available
Retainer Plate
Part #783P08577A
It is a genuine item that is supplied by the original equipment manufacturer for use with lawn mowers. The retainer plate is designed to secure the steering gear assembly. It provides an identical replacement for a missing or a damaged part that was installed on a new equipment. Please check the diagrams for your model to ensure the correct repair procedure. Keep in mind this high-quality retainer plate is made of durable metal and is sold as an individual item. You may need a wrench set to replace this retainer plate.
LENS-CPX GRILLE RH – Part Number: 731P09757A
No Longer Available
LENS-CPX GRILLE RH
Part #731P09757A
WIRE HARNESS (W/RMC, W/O AMM) – Part Number: 725P04432P
No Longer Available
Muffler-b&s Single – Part Number: 951-05956B
No Longer Available
Muffler-b&s Single
Part #951-05956B
It is a genuine OEM sourced replacement muffler with a welded exhaust pipe, it is commonly installed on the gas-powered lawn and garden equipment. Its purpose is to soften the noise coming from the engine, over time it may get get clogged or damaged eventually requiring a replacement. It is specially manufactured to meet the EPA exhaust regulations. This high-quality component is made of durable metal and it is sold individually, please note the hardware to secure the it and the gaskets are all sold separately.
Internal Lock Washer, 1/4 – Part Number: 736-03006
No Longer Available
Internal Lock Washer, 1/4
Part #736-03006
FENDER-LT5 SNGL BL – Part Number: 783-04587E-0691
No Longer Available
FENDER-LT5 SNGL BL
Part #783-04587E-0691
BRKT-PIVOT BAR – Part Number: 783-05326D-0637
No Longer Available
BRKT-PIVOT BAR
Part #783-05326D-0637
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oil Drain Sleeve
8 of 13 people found this instruction helpful.
  • Laurie from RICHLANDS, NC
  • Very Easy
  • Less than 15 mins
  • Pliers, Socket set, Wrench (Adjustable), Wrench set
I wish this was longer...it's only about 6", barely enough to have the oil flow past the metal plate of the riding lawnmower. I'm going to figure out a way to make a permanent extension something like this video would be SO much better https://www.youtube.com/watch?v=G9ZVoeqr6R8&t=79s
Was this helpful?
Thank you for voting!
upper transmission belt cracked bad
6 of 7 people found this instruction helpful.
  • William from TRIANGLE, VA
  • Easy
  • 30 - 60 mins
  • Pliers, Wrench set
Removed battery, then battery hanger brackets.
Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley.
put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal.
Getting the t ension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring.
cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
Blade got bend after hit a stump so had to buy new spindle shaft
6 of 27 people found this instruction helpful.
  • Randall from GALLIPOLIS, OH
  • Very Easy
  • Less than 15 mins
  • Socket set
The repair was a very easy.
Was this helpful?
Thank you for voting!