2456X2A Roper Range - Overview
Sections of the 2456X2A
[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Agitator Assembly
PartSelect #: PS334559
Manufacturer #: 285574
Does not include softener dispenser. **** Some assembly required.****
$185.50
Special Order
Common Symptoms of the 2456X2A
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Agitator wasn't spinning well
First I removed the screw that held it in place with a socket. The agitator became loose and easy to remove at this time so I lifted it from the washing machine. I then just placed the new agitator in place and replaced the screw being careful not to do it too tight. The replacing of this part was an easy job and thanks to Part Select it saves me hundreds of dollars.
Parts Used:
-
Nora from Marshall, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
26 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
agitator top half would not turn
unplugged unit,removed liquid cup,removed nut holding agitator,removed agitator installed new one installed nut tightened and tested operation very easy job!
Parts Used:
-
patrick from steubenville, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
11 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
top of agitator was stripped
pulled the detergent cup off, pulled the cap out of the upper part of agitator, removed bolt and pulled assembly out. then reversed the process with the new assembly.
Parts Used:
-
Joseph from Winter Haven, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!