225587494 Craftsman Chainsaw - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Guard-Muffler – Part Number: 699892
No Longer Available
Guard-Muffler
Part #699892
Hose Combo – Part Number: 16928
No Longer Available
Hose Combo
Part #16928
Filter – Part Number: 17816
No Longer Available
Filter
Part #17816
This is a Craftsman brand filter. It is a direct replacement for the filter that came originally with the vacuum. The purpose of the filter is to keep dust and debris from clogging the vacuum. It works well for handling sawdust, dirt, debris, etc. It fits most wet/dry vacuum models above 5 gallons that were made after 1992. It also fits most 6, 8, 12, 16, 32 gallon vacuums made after 1988. The filter is made from pleated paper. The filter is sold individually. No tools are required for installation. We recommend changing the filter often to ensure high performance for your vacuum.
Machine Screw, 8-pack – Part Number: 1979
No Longer Available
Pin – Part Number: 318372
No Longer Available
Pin
Part #318372
Screw – Part Number: 10328
No Longer Available
Screw
Part #10328
Element – Part Number: 31410
No Longer Available
Element
Part #31410
FRAME – Part Number: 10292
No Longer Available
FRAME
Part #10292
Rod-connecting – Part Number: 398578
No Longer Available
Rod-connecting
Part #398578
Cylinder – Part Number: 12066
No Longer Available
Cylinder
Part #12066
Screw 10-32 X 1-7/8" – Part Number: 8015
No Longer Available
Nozzle-Carburetor – Part Number: 712017
No Longer Available
Nozzle-Carburetor
Part #712017
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The hose was broken - separated from the connector
1 person found this instruction helpful.
  • Gary from WILLMAR, MN
  • Very Difficult
  • 30 - 60 mins
I was disappointed to find the hose kit to not be correct, since the information on the site said it would work for my model. After trying various combinations of ends I decided to modify my existing connector. It had a ridge that would not let the hose coupler go on. I was able to grind that ridge off. I then fitted the connector over th e end, after putting waterproof adhesive on the end. I let that set up for 4 hours, then inserted the hose inside the other end. So far it is holding.
Was this helpful?
Thank you for voting!