225581981 Craftsman Cultivator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Hose Combo – Part Number: 16928
No Longer Available
Hose Combo
Part #16928
Element – Part Number: 31410
No Longer Available
Element
Part #31410
Filter – Part Number: 17816
No Longer Available
Filter
Part #17816
This is a Craftsman brand filter. It is a direct replacement for the filter that came originally with the vacuum. The purpose of the filter is to keep dust and debris from clogging the vacuum. It works well for handling sawdust, dirt, debris, etc. It fits most wet/dry vacuum models above 5 gallons that were made after 1992. It also fits most 6, 8, 12, 16, 32 gallon vacuums made after 1988. The filter is made from pleated paper. The filter is sold individually. No tools are required for installation. We recommend changing the filter often to ensure high performance for your vacuum.
Rod-connecting – Part Number: 398578
No Longer Available
Rod-connecting
Part #398578
Shroud – Part Number: 9030
No Longer Available
Shroud
Part #9030
Fan – Part Number: 1832
No Longer Available
Fan
Part #1832
V-belt – Part Number: 10242
No Longer Available
V-belt
Part #10242
Tote – Part Number: 17815
No Longer Available
Tote
Part #17815
Hose – Part Number: 17822
No Longer Available
Hose
Part #17822
Clamp Spring – Part Number: 1341
No Longer Available
Clamp Spring
Part #1341
Depth Stop – Part Number: 8058
No Longer Available
Depth Stop
Part #8058
Cap screw, 8-pack – Part Number: 1493
No Longer Available
Cap screw, 8-pack
Part #1493
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The hose was broken - separated from the connector
1 person found this instruction helpful.
  • Gary from WILLMAR, MN
  • Very Difficult
  • 30 - 60 mins
I was disappointed to find the hose kit to not be correct, since the information on the site said it would work for my model. After trying various combinations of ends I decided to modify my existing connector. It had a ridge that would not let the hose coupler go on. I was able to grind that ridge off. I then fitted the connector over th e end, after putting waterproof adhesive on the end. I let that set up for 4 hours, then inserted the hose inside the other end. So far it is holding.
Was this helpful?
Thank you for voting!