212907-0025-E1 Briggs and Stratton Engine - Overview
Sections of the 212907-0025-E1
[Viewing 8 of 8]-
Air Cleaner Blower Housing Exhaust System
-
Alternator
-
Camshaft Crankshaft Lubrication Piston Rings Connecting Rod
-
Carburetor Kit - Carburetor Overhaul
-
Controls Fuel Supply Governor Spring Ignition
-
Cylinder Engine Sump
-
Cylinder Head Gasket Set - Engine Gasket Set - Valve Valves
-
Electric Starter Flywheel Rewind Starter
Exact Part matches for your search term
[Viewing 1 of 1]
ENGINE 9 HP
This part number matches the current model number 212907-0025-E1
PartSelect #: PS18553190
Manufacturer #: 212907-0025-E1
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Puller-flywheel
PartSelect #: PS8905120
Manufacturer #: 19203
This flywheel puller is designed for servicing larger small engines by safely removing tightly seated flywheels without stressing the crankshaft or damaging ignition components. Constructed from heavy...
$33.95
Special Order
Float-carburetor
PartSelect #: PS8980404
Manufacturer #: 494381
This is a genuine OEM supplied replacement carburetor float designed for lawn and garden equipment engines. This float controls fuel flow into the carburetor bowl by adjusting the needle valve. Includ...
$25.95
Special Order
Gasket-float Bowl
PartSelect #: PS8945656
Manufacturer #: 281165S
This is a Genuine OEM replacement part used on variety of Lawn and Garden Equipment Engines. This part is made out of Rubber and it is sold individually. If the carburetor is leaking fuel it is recomm...
$8.95
In Stock
Order within the next 10 hrs and your part ships today!
Key-flywheel
PartSelect #: PS8925657
Manufacturer #: 222698S
This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Plier...
$5.95
In Stock
Order within the next 10 hrs and your part ships today!
Engine Float Valve Needle
PartSelect #: PS8925553
Manufacturer #: 231855S
This is a genuine manufacturer approved carburetor needle valve for lawn and garden equipment engines. The needle valve opens and closes to control the flow of fuel into the carburetor. It is made out...
$11.95
On Order
Starter Pawl-Ratchet
PartSelect #: PS8942598
Manufacturer #: 281505S
This Genuine OEM ratchet pawl is a critical component designed to engage the recoil starting system with the engine, ensuring smooth and reliable starts. Manufactured from durable plastic, this replac...
$5.95
Special Order
Rod-connecting
PartSelect #: PS9140668
Manufacturer #: 791633
This item is a genuine replacement part that has been sourced from the original manufacturer to be used with lawnmower engines from Briggs & Stratton and Toro. The metal connecting rod is used to link...
$144.95
Special Order
Nut
PartSelect #: PS9062692
Manufacturer #: 690958
This is a genuine manufacturer-sourced component which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It provides an identical replacem...
$5.95
Special Order
Seal-choke/thr Shaft
PartSelect #: PS9063574
Manufacturer #: 690998
It is a genuine OEM item that is made for Briggs and Stratton engines that are commonly installed on a variety of lawn and garden equipment. This is a special component which helps to provide a tight ...
$13.95
Special Order
Common Symptoms of the 212907-0025-E1
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Screw can out of the carburator throttle baffel and stuck in the exhaust valve
No compression. Removed the cylinder head. freed the screw, checked the valve to see if it still sealed. Turned the head over with the valves in it, install a spark plug, fill the head dome with gas and see if any leeks out over a 2 hr period. If not you are good to go. Reinstalled every thing with new gaskets and a new carburetor screw. Set the valves to spec. Complete the rebuild and there you have it. Rebuild the carburetor while you have it apart. This motor runs great !!!
Parts Used:
-
FRANK from EASTANOLLEE, GA
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Socket set, Wrench set
9 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stopped running. Turned to be a bent intake push rod and broken rocker arm
Removed head. Replaced both rocker arms, intake pus rod, push rod guide exhaust and head gaskets. Torqued head in 3 stages to 216 in/lbs. gapped intake to .004 and exhaust to .006 at TDC
Added oil and gas. Now running great
If you need to replace push rods use steel (exhaust) they are the same length
The engine was a Briggs & Stratton 217802 0113 E10604 (2006 year date code)
I used the following
796189 gasket
272475S gasket
697494 push rod
690822 push rod guide
691751 rocker arms
Added oil and gas. Now running great
If you need to replace push rods use steel (exhaust) they are the same length
The engine was a Briggs & Stratton 217802 0113 E10604 (2006 year date code)
I used the following
796189 gasket
272475S gasket
697494 push rod
690822 push rod guide
691751 rocker arms
Parts Used:
-
Rene from COVINGTON, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Socket set, Wrench set
9 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas leaking from tube breather
First I opened the top of the mower to expose the housing cover. Secondly I removed the four housing bolts to remove the housing cover from the mower. Next I removed the tube breather and installed the new tube breather and replaced the housing cover with the four bolts previously removed and closed the top of the mower. I filled the mower with gas to check for leaks which weren't any leaks. I proceeded to mow the lawn with ease.
Parts Used:
-
Emanuel from FERRIDAY, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
9 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!