2038-220 (Type 101) Black and Decker Screwdriver - Overview

Includes part numbers 330003-04, 93128-00, 696631-00, 94518-00

It is a genuine item that is supplied directly from the original equipment manufacturer for use with DeWALT and Black and Decker screwdrivers. This special component is utilized to provide an air-tight seal between connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and application...Read more of this hardware. Keep in mind over time the material may wear out and crack eventually requiring a replacement. It is a high-quality seal which is made of durable material is sold individually.

Genuine Dewalt replacement part, this item is sold individually. The 696631-00 Steel Ball is part of the chuck assembly of the Impact Drivers shown below. When you pull back the sleeve of the chuck assembly and insert your bit, the Steel Ball is the part that locks the bit in the chuck assembly. In the Screw Drivers listed below this is the part that secures the Bit Holder in the spindle.

This is a genuine manufacturer-approved component which is designed for use with DeWALT and Black and Decker screwdrivers. The purpose of a spring is to apply tension on the guide in the clutch. Unfortunately, over time it may wear out, get damaged or simply lost eventually requiring a replacement. To ensure the exact location and the cor...Read morerect application of this hardware, refer to the diagrams of your model. One durable metal spring is included.

This is an original replacement part manufactured for use with electric power tools. The special sleeve is commonly used to provide spacing between the armature bearing and the motor housing. This sleeve is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine OEM replacement part, it is sold individually. This part is used to keep the brush tight against the armature so the tool will work properly. Over time when the brushes wear down and heat is created, the spring may lose its tension and will have to be replaced.

This is an authentic Black & Decker replacement part. The terminal is designed by the manufacturer for use in drills, screwdrivers, and shears. This part is made of metal, and is used to create an electrical connection within the machine. You may require a screwdriver or Allen wrench and pliers when replacing this part. This item is sold individually. Included in part number 450562-00

A genuine item that is supplied directly from the original equipment manufacturer for use with DeWALT and Black and Decker screwdrivers. It is a high-quality replacement for a faulty or missing guide that was installed on a new tool. To ensure the proper application, refer to the owner's manual and the diagrams for your specific model. No...Read morete, this high-quality guide is made of durable metal and is sold as an individual item. A screwdriver will be needed to take apart and reassemble the housing when performing this repair.

This retainer, also known as a retaining ring or split ring, is a genuine OEM replacement part used in cordless drills. It is responsible for securing the spindle within the clutch housing so that it remains stable during use and ensuring the components such as gears and bearings do not slide off the spindle. Over time the retainer may cr...Read moreack, corrode, or fall off, leading to wobbly parts and excessive vibration. Ensure the drill is off before beginning the replacement. Remove the chuck, and clutch housing. Use a set of pliers to remove the retainer from its groove. Clean the mounting surface and place the new ring in the groove on the spindle. Reassemble the drill components in reverse order.

Genuine Manufacturer Sourced replacement part used on a variety of Power Tools. This part is made out of Metal and it is sold individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces frictio...Read moren. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. Included in part number 605511-00