1WC95 (Type 2) DeVilbiss Compressor - Overview

Diagrams for 1WC95

See every part. Know exactly what you need.

Parts for the 1WC95

Kit Connecting Rod

Part #A02743

Nut .375-16 UNC-2B H

Part #SSF-8080-ZN

Screw #10-32X.750 Fi

Part #D20605

Shroud Rear Twin Cyl

Part #DAC-243

Tube Pressure Relief

Part #AC-0630

This is a genuine OEM sourced part which is specially made for use with Porter Cable, DeVilbiss and Black and Decker air compressors. It is an identical replacement for a faulty or a missing pressure relief tube that was installed on a new unit. The part connects to the manifold and the pressure switch, please make sure to refer to the ap...Read more

Read less

Kit Comp Ring HP Rep

Part #K-0648

This is an authentic kit that has been sourced from the original manufacturer to be used with Black and Decker, Porter Cable and DeVilbiss air compressors. Over time parts may wear out causing poor performance and eventually requiring replacements. Refer to the appropriate diagrams for your model to ensure the correct repair procedure. Th...Read more

Read less

Screw and Washer

Part #5140118-82

Cover Intake Muffler

Part #AC-0783

Kit Connecting Rod H

Part #D24958

Tube Outlet 2 Stage

Part #AC-0803

Nipple .25NPT X 2.5

Part #D24888

Bumper Recessed Rub

Part #SST-107

Common Symptoms of the 1WC95

How this model fails, and the parts that fix it.

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

The air was bypassing the compressor gaskets and cylinder wall was worn out

18 of 24 people found this instruction helpful.

Charles from GARRISON, TX
Easy
30 - 60 mins
Screw drivers, Socket set

1 remove cover
2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on th ... Read more

Read less

Was this helpful?

Can't find this special screw used on many housings etc

4 of 6 people found this instruction helpful.

Tim from Tucson, AZ
Very Easy
15 - 30 mins

Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called ... Read more

Read less

Was this helpful?

Broken ground on original plug

2 of 2 people found this instruction helpful.

Debra from PRESCOTT VLY, AZ
Really Easy
15 - 30 mins
Screw drivers

Removed cover & old cord.
Replaced with new cord & replaced cover.
Works perfect.

Was this helpful?