1J501-1N2 General Electric Range - Overview

Diagrams for 1J501-1N2

See every part. Know exactly what you need.

Parts for the 1J501-1N2

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake Element – Part Number: WB44X5099
$42.95
Special Order
Bake Element
Part #WB44X5099
This closed hinged-style bake element has screw in terminals.
Silicone Door Gasket – Part Number: WB2X1522
$84.23
Special Order
Silicone Door Gasket
Part #WB2X1522
This gasket seals the range/oven door.
Broil Element – Part Number: WB45X56
No Longer Available
Broil Element
Part #WB45X56
Thermostat – Part Number: WB21X5209
No Longer Available
Thermostat
Part #WB21X5209
The length of this thermostat's capillary is 62 inches.
DISCONTINUED – Part Number: WB24X74
No Longer Available
DISCONTINUED
Part #WB24X74

Common Symptoms of the 1J501-1N2

How this model fails, and the parts that fix it.

Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The lower bake element burned out.
67 of 72 people found this instruction helpful.
  • Carlos from Southaven, MS
  • Really Easy
  • Less than 15 mins
  • Nutdriver
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, reconnected the wires to the new element, reattached it to the oven and voila!

It worked. What was really cool, once I ordered the part, I received it in only two work days!

Goo d job folks!
Read less
Was this helpful?
Thank you for voting!
Replaced lower element in GE Spectra range.
22 of 31 people found this instruction helpful.
  • Phillip from Greeneville, TN
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Hardest part was getting the wrong element and having to send it back and reordering correct one....too many variables. Two screws inside the oven removed, pull out range and take off back and attach new element to plug ins!
Was this helpful?
Thank you for voting!
Old element burned through. Sparks were flying!
19 of 26 people found this instruction helpful.
  • David from Baton Rouge, LA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Turned off power at breaker panel. Removed 2 screws attaching element to stove. Pulled element out a couple of inches and removed 2 wires attached with screws. Installation is reverse order of removal.
Be careful not to twist the terminal ends when tightening screws.

shipping was very fast!
Was this helpful?
Thank you for voting!
View More