1CSF624J General Electric Refrigerator - Overview

Diagrams for 1CSF624J

See every part. Know exactly what you need.

Parts for the 1CSF624J

Evaporator Fan Blade Kit

Part #WR60X114

$37.95

Rear Wheel

Part #WR2X3594

This rear wheel is sold individually. The wheel pin is not included with this roller.

$27.22

Defrost Thermostat Kit

Part #WR50X50

The defrost thermostat included in this kit cuts out at 50 degrees Fahrenheit and kicks back in when the temperature drops to 30 degrees Fahrenheit. Also included in this kit are two interchangeable brackets and crimp style wire connectors. Use this kit for your GE brand refrigerator.

Fresh Food Door Gasket

Part #WR24X246

This white door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

Condenser Fan Motor

Part #WR60X177

This condenser fan motor operates in a clockwise fashion. The fan itself has two 1/4 inch spade terminals. It carries 2 watts and 115 volts. This motor NO longer comes with cover for terminals.

EVAPORATOR FAN MOTOR KIT

Part #WR60X30349

This evaporator fan motor operates in a counter clockwise fashion. This motor's shaft is 3/8 of an inch and the motor has two right side terminals. NOTE: Harness wires NO longer come with the part.

Cold Control Thermostat

Part #WR9X405

This cold control thermostat cycles on and off regularly to keep your refrigerator cold.

Cut to Fit Door Gasket Kit - Gray

Part #WR24X433

This gray door gasket kit is cut to fit your refrigerator, though some assembly is required. Use it for your GE brand refrigerator.

DEF CONT Package

Part #WR9X331

$66.95

SWITCH

Part #WR23X142

DISCONTINUED

Part #WR49X394

Common Symptoms of the 1CSF624J

How this model fails, and the parts that fix it.

Noisy

Fixed by
these parts

Freezer section too warm

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Noisey fan/motor (bad motor bearing ?)

37 of 46 people found this instruction helpful.

Keith from Fort Worth, TX
Really Easy
15 - 30 mins
Pliers, Screw drivers

Removed 2 phillips head screws to remove ice maker (could have just loosened them)
Pulled fan off of shaft
Removed 2 phillips head screws on motor bracket , disconnected three motor wires & removed motor.
reversed process to install new motor & fan blade.
Space was a little tight for two hand and arms, but do-able.

Other Parts Used:

EVAPORATOR FAN MOTOR KIT

Evaporator Fan Blade Kit

Was this helpful?

Wouldn't cool

18 of 25 people found this instruction helpful.

Clarence from Great Cacapon, WV
Really Easy
15 - 30 mins
Socket set

I removed the 3 screws that held the motor and fan. Exchanged fan blades and reinstalled the fan and new motor

I was surprised to find the motor. The refrigerator/freezer was over 28 yrs old. Works fine now

Was this helpful?

Motor rattled loudly

15 of 17 people found this instruction helpful.

Robert from Kingwood, TX
Really Easy
15 - 30 mins
Nutdriver

Turned off the refridgerator. Took everything out of the freezer compartment & put into ice chest with pleanty of ice on top. Removed 2 screws holding the ice maker in place & placed ice maker aside. Removed shelf. Removed one screw on back plate, pushed up on the holding tabs at the top of the back plate & removed the back plate. Removed ... Read more

Read less

Was this helpful?