My Orders
19F Briggs and Stratton Engine - Overview
Models starting with 19F
Click on the best match to narrow your results.
- 19F400 (0043-1137) Briggs and Stratton Engine (Engine)
- 19F400SERIES (0043-1137) Briggs and Stratton Engine (Engine)
- 19F412 (1136-E1) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 19F412/1136-E1 (19F412/1136E1, 19F412/1136 E1) Parts)
- 19F412 (0144-01) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 19F412/0144-01 (19F412/014401, 19F412/0144 01) Parts)
- 19F412-0136-01 Briggs and Stratton Engine (Engine, Rewind Starter)
- 19F432 (0133-01) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 19F432/0133-01 (19F432/013301, 19F432/0133 01) Parts)
- 19F432 (1133-E1) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 19F432/1133-E1 (19F432/1133E1, 19F432/1133 E1) Parts)
- 19F432 (1101-E1) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 19F432/1101-E1 (19F432/1101E1, 19F432/1101 E1) Parts)
- 19F432 (1137-E1) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 19F432/1137-E1 (19F432/1137E1, 19F432/1137 E1) Parts)
- 19F432 (1043-E1) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 19F432/1043-E1 (19F432/1043E1, 19F432/1043 E1) Parts)
- 19F432 (0043-01) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 19F432/0043-01 (19F432/004301, 19F432/0043 01) Parts)
- 19F436 (0112-01) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 19F436/0112-01 (19F436/011201, 19F436/0112 01) Parts)
- 19F437 (1132-E1) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 19F437/1132-E1 (19F437/1132E1, 19F437/1132 E1) Parts)
- 19F437 (0132-01) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 19F437/0132-01 (19F437/013201, 19F437/0132 01) Parts)
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$61.95
Special Order
Valve-Intake
Part #261055S
$33.95
Special Order
Puller-flywheel
Part #19203
This flywheel puller is designed for servicing larger small engines by safely removing tightly seated flywheels without stressing the crankshaft or damaging ignition components. Constructed from heavy-duty steel and engineered to apply even pulling force, it makes accessing the magneto, crankshaft key, or ignition system straightforward d...Read moreuring repairs or overhauls. Built to OEM specifications for durability and precise fit, it’s a reliable tool for maintaining lawn mowers, generators, and pressure washers with compatible engines.
Read less
$8.95
In Stock
Gasket-float Bowl
Part #281165S
This is a Genuine OEM replacement part used on variety of Lawn and Garden Equipment Engines. This part is made out of Rubber and it is sold individually. If the carburetor is leaking fuel it is recommended to replace the Bowl Gasket. Gaskets and O-rings are a common source of problems. They eventually shrink, causing fuel and air leaks that lead to poor engine performance.
$70.95
Special Order
Clutch-starter
Part #399671
Hard starting may come from the recoil system instead of the carburetor or spark plug. If the rope pulls but the engine does not turn, the starter clutch may be worn, dirty, or jammed. The clutch turns the crankshaft during starting and lets go when the engine runs. First inspect the rope, rewind spring, pulley, flywheel screen, and clutc...Read moreh bearing. Confirm fit with the complete engine number. Remove the spark plug wire, wait for hot parts to cool, and keep dirt out of the bearing area. Test free movement before putting the shroud back on.
Read less
$53.95
Special Order
$25.95
Special Order
Float-carburetor
Part #494381
This is a genuine OEM supplied replacement carburetor float designed for lawn and garden equipment engines. This float controls fuel flow into the carburetor bowl by adjusting the needle valve. Includes a plastic float and a metal pin used to secure the float. To complete this repair you would need a wrench and pliers. • Make sure to ...Read moreremove the spark plug • Remove carburetor bowl • Remove old float and secure the new one in place • Re-assemble and test the unit
Read less
$7.95
Special Order
Bolt
Part #691119
$173.95
Special Order
Muffler
Part #497141
This muffler reduces exhaust noise while directing emissions safely away from the engine. Designed for durability, it supports efficient operation and consistent performance.
$101.95
Special Order
Breather Assembly
Part #497710
$10.95
Special Order
Filter-pre Cleaner
Part #492889
This replacement filter-pre cleaner is a genuine OEM sourced item, not an aftermarket imitation. It is a high quality item commonly utilized on Briggs and Stratton engines. This item adds a extra layer of filtration for the unit. This foam pre-cleaner is sold individually. Please note, the main pleated paper filter is sold separately. Yo...Read moreu will need a screwdriver to replace this item. • Remove the filter cover • Take out the old filter • Secure the new cleaner • Secure the cover
Read less
$13.95
Special Order
Keeper-valve
Part #494553
$196.95
In Stock
Motor-starter
Part #497595
This starter motor is for lawn and garden equipment engines.
Starter motor spins the flywheel to start the engine.
Wear work gloves to protect your hands when installing this part.
Common Symptoms of models starting with 19F
How this model fails, and the parts that fix it.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Gas tank leaking, pull starter rivets worn, rope and rope bushing worn
3 of 10 people
found this instruction helpful.
The gas tank was a simple job, close the fuel shut off, remove fuel hose then back out 2 bolts on the mounting bracket. Reverse procedure to mount.
To replace the pull starter/recoil assy. Remove low oil warning light, and air filter housing then remove the 4 bolts holding the front cover. Once the front cover is free remove kill sw ... Read more itch wire
Drill out the rivets holding the recoil housing w/ 3/16 bit. Screws w/ nuts are included to use in place of rivets, I used red Locktite on the screws which hold the started recoil to the front cover. Make sure the pull rope is correctly oriented in the 11:00 position. Replace front cover, four bolts. Air filter housing, kill switch wire and low oil warning light
To replace the pull starter/recoil assy. Remove low oil warning light, and air filter housing then remove the 4 bolts holding the front cover. Once the front cover is free remove kill sw ... Read more itch wire
Drill out the rivets holding the recoil housing w/ 3/16 bit. Screws w/ nuts are included to use in place of rivets, I used red Locktite on the screws which hold the started recoil to the front cover. Make sure the pull rope is correctly oriented in the 11:00 position. Replace front cover, four bolts. Air filter housing, kill switch wire and low oil warning light
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!