18M23TA-P1214802R Amana Air Conditioner - Overview

Diagrams for 18M23TA-P1214802R

See every part. Know exactly what you need.

Parts for the 18M23TA-P1214802R

$51.90

Igniter Kit

★★★★★

(13)

Part #279311

This silicone carbide igniter with ceramic holder kit includes the 3" flat igniter, bracket, 4" wire leads, and the plug. It can replace both round and flat igniters. This kit is used for many gas clothes dryers.

$10.40

Dryer Screw

Part #WP90767

This screw is sold individually.

$12.37

Screw Kit

Part #R9800670

Includes 2 screws.

$10.95

Refrigerator Single Hex Head Screw

Part #WP489069

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$13.95

Screw

Part #WP489427

Sold individually.

Gasket - sold by the foot

Part #10839706

This gasket is gray and is made of a spongy material. This gasket is used for many air conditioners. It will come to you at the length you specify: one foot, two feet, whatever you require. When ordering over the internet, requesting a quantity of one will result in you receiving one foot of this gasket. Requesting a quantity of two will result in you receiving two feet of this gasket, and so on.

GASKET

Part #A3030302

Vertical Louver Gang Bar

Part #20051404

This vertical louver gang bar is almost four inches long. It is all black in color and is made of plastic. It controls the movement of an air conditioner's vertical louvers.

LOUVER-HORIZ (QTY 2)

Part #20062301

$10.95

Zip Tie

Part #WPW10339879

Dual Run Capacitor

Part #4318131

30+10 440V

BRKT, FAN MOTOR

Part #20072901

Common Symptoms of the 18M23TA-P1214802R

How this model fails, and the parts that fix it.

Not Heating

Fixed by
these parts

Show All

Videos related to the 18M23TA-P1214802R

Watch our pros, then fix it yourself.

Replacing the Igniter Kit

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

No heat to dry clothes

66 of 77 people found this instruction helpful.

Karen from Pine Mtn. Club,, CA
Easy
15 - 30 mins
Screw drivers, Socket set

First I took the front of the dryer off then located the igniter. It only required removing two screws, removing old igniter, replacing with new igniter, and replacing the two screws.. While I was replacing the igniter I took the drum out and throughly cleaned the inside. Lucky me, I found 85 cents on the floor of the dryer. I am 65yr ... Read more

Read less

Was this helpful?

no heat

31 of 40 people found this instruction helpful.

rex from streator, IL
Really Easy
15 - 30 mins
Nutdriver, Wrench (Adjustable)

the ignitor did not glow red checked thermal fuse by exhaust duct. fuse open replaced thermal fuse

Was this helpful?

dryer stoped heating

23 of 26 people found this instruction helpful.

valerie from Elasmore, KS
Really Easy
15 - 30 mins
Nutdriver

the problem was not the igniter its was the thermal fuse I broke the igniter during inspection of the problem be careful its a very easy thing to break repairs complete thank you parts select for the quick shipping and low prices

Was this helpful?