1780-0 Briggs and Stratton Pressure Washer - Overview

Diagrams for 1780-0

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Kit, Engine Mounting Hardware – Part Number: 192134GS
$55.95
Special Order
Kit, Engine Mounting Hardware
Part #192134GS
The engine mounting hardware kit is sold as a set that contains all the necessary parts. These are genuine items that are supplied by the original equipment manufacturer for use with pressure washers made by Briggs & Stratton, Troy-Bilt, and Snapper. A wrench set might be necessary during the installation of these parts. These items might break over time and will need replacing.
Nozzle, Qc, Green – Part Number: 195983CGS
$20.95
Special Order
Nozzle, Qc, Green
Part #195983CGS
Chemical Injection Kit – Part Number: 192914GS
No Longer Available
Chemical Injection Kit
Part #192914GS
It is a high-quality item that is supplied by the original equipment for use with Briggs and Stratton, Troy-Bilt and Snapper pressure washers. The kit includes a fitting that allows a user to connect the hose that supplies the chemical cleaning solution. Unfortunately, over time components on your equipment may wear out or get damaged eventually requiring a replacement. Make sure to check the appropriate diagrams and the owners manual of your model for the correct installation of these parts. The kit includes one durable brass fittings, a metal ball, a spring and a rubber seal. To replace it, you will need a wrench set to remove the old fitting and secure the new one.
Valve,Thermal – Part Number: 195016GS
$43.95
Special Order
Valve,Thermal
Part #195016GS
18oz 30w 4 Cycle Oil – Part Number: 100005
$8.95
In Stock
18oz 30w 4 Cycle Oil
Part #100005
This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.
Kit, Chem Hose & Filter – Part Number: 192796GS
$31.95
Special Order
Kit, Chem Hose & Filter
Part #192796GS
Grommet – Part Number: 30809GS
$7.95
Special Order
Grommet
Part #30809GS
Pump Saver Kit - 4oz – Part Number: 6039
$21.95
Special Order
Pump Saver Kit - 4oz
Part #6039
This is an authentic OEM part from Briggs and Stratton, Troy-Bilt, and Snapper for use with Pressure Washers. The Briggs & Stratton Pressure Washer Pump Saver prevents harmful buildup of hard-water mineral deposits in the pump, maintains pump seals and pistons and promotes longer pump life. It contains anti-freeze to protect the pump from freezing and provides safe winter storage. This part is sold individually. No mixing, stirring or shaking is required. Just attach the pump saver to the pump and dispense.
Garden Hose Filter – Part Number: B2384GS
$8.95
Special Order
Garden Hose Filter
Part #B2384GS
This is a genuine OEM sourced replacement part that is intended to be used with pressure washers from Craftsman. The screen fits into the water inlet tube and is used to prevent debris from the hose from entering the pump assembly. This item is available as an individual replacement part.
Gun – Part Number: 704311
$219.95
Special Order
Gun
Part #704311
O-Ring Kit – Part Number: 705001
$34.95
Special Order
O-Ring Kit
Part #705001
This item is an authentic OEM sourced O-ring kit that replaces worn or damaged O-rings for the gun, hose and wand.Unfortunately, over time o-rings will wear out and they may begin to crack eventually requiring replacements. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure. A screwdriver and a wrench set might be needed to take apart and reassemble the equipment. Note, this kit is sold as an individual item.
Wand-qc – Part Number: 706595
$89.95
Special Order
Wand-qc
Part #706595
This is an authentic OEM part for use with Craftsman Pressure Washers. The quick connector also is known as the wand connects to the spray gun handle and houses the nozzle that directs the spray stream. The most common reason for replacing the wand is if it is leaking or damaged. This part is sold individually. The tool that you will need to replace the wand is Silicone grease (optional).

Common Symptoms of the 1780-0

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The copper fitting on the chemical injection broke.
12 of 17 people found this instruction helpful.
  • Carl from ARCADIA, FL
  • Very Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
I order the part from this site and received it within a week. the only problem was that spring was missing out of the sealed bag. NO PROBLEM!!! I cut a ball point pen spring to fit and everything works just fine. You just have to remember to put the spring in first, then the ball bearing and then the rubber o-ring.If you put them in back wards you pressure will fed directly into your chemical container!!
Was this helpful?
Thank you for voting!