1750000 Maytag Microwave - Overview

Diagrams for 1750000

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Heat Resistant Adhesive – Part Number: W10841140
$29.65
In Stock
Heat Resistant Adhesive
★★★★★
★★★★★
(1)
Part #W10841140
This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising the integrity of the adhesive. It is white in color, and the tube is approximately 7.5 inches long.
Ceramic Fuse - 20 amp – Part Number: WPM0805101
$16.37
In Stock
Ceramic Fuse - 20 amp
★★★★★
★★★★★
(1)
Part #WPM0805101
This ceramic microwave fuse is just over an inch long. It is white in the center, while each end is made of metal. This is a twenty amp fuse.
Dryer Screw – Part Number: WP90767
$10.40
In Stock
Dryer Screw
Part #WP90767
This screw is sold individually.
Range Hex Nut – Part Number: WP488130
$12.05
Special Order
Range Hex Nut
Part #WP488130
Part may differ in appearance, but functions same as original.
Screw – Part Number: WP489474
$11.76
In Stock
Screw
Part #WP489474
Sold individually.
Refrigerator Screw – Part Number: WP489464
$15.39
In Stock
Refrigerator Screw
Part #WP489464
Sold individually.
SCREW – Part Number: W11227370
$30.39
In Stock
SCREW
Part #W11227370
USE MAC 59001166 – Part Number: M10D56
No Longer Available
USE MAC 59001166
Part #M10D56
SUB M0282005 – Part Number: M1D363
No Longer Available
SUB M0282005
Part #M1D363
USE MAC M0287001 – Part Number: M1D625
No Longer Available
USE MAC M0287001
Part #M1D625
USE MAC 10839705 – Part Number: M1D737
No Longer Available
USE MAC 10839705
Part #M1D737
SUB M0234029 – Part Number: M1D9
No Longer Available
SUB M0234029
Part #M1D9

Common Symptoms of the 1750000

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
microwave oven blew fuse
27 of 43 people found this instruction helpful.
  • tad from tamarack, MN
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With th e help of a bladed screwdriver, I pushed new fuse into holder, then replaced panel, screw and grill. This took less than 15 minutes even as one of the wires on control panel pulled out of connection and took some time to locate where to reconnect, otherwise was an easy fix
.
Was this helpful?
Thank you for voting!
microve stopped working
15 of 30 people found this instruction helpful.
  • Denice from Montgomery, AL
  • Really Easy
  • 15 - 30 mins
Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise
Was this helpful?
Thank you for voting!
Died while heating lasagna
9 of 17 people found this instruction helpful.
  • connie from madison, NC
  • Really Easy
  • Less than 15 mins
Removed 4 small star head screws from back of microwave, lifted body off, removed blown fuse and replaced with new one (found where cord enters). This model is stainless inside and out and I like it a lot. It is also sold by Daewoo and a few other manufacturers.
Was this helpful?
Thank you for voting!