My Orders
1695953 (2010) Briggs and Stratton Snow Blower - Overview
Diagrams for 1695953
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$6.95
Special Order
Engine Muffler Guard Screw
Part #699854
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This replacement screw is generally used to secure the muffler guard, for correct application make sure to check appropriate diagrams of your model. It is a high-quality Torx screw which is sold individually.
$15.95
In Stock
Lower Drive Cable (12'')
Part #1501122MA
This lower front drive cable is designed to engage and disengage the traction system on two-stage snowblowers, allowing smooth, reliable forward and reverse movement. Built with a durable steel inner wire and protective outer conduit, it helps maintain consistent drive response in cold, demanding conditions. Ideal for replacing a stretche...Read mored, frayed, or broken cable, it restores dependable traction control and easy handling during snow-clearing operation.
Read less
$29.95
Special Order
Auger Clutch Cable
Part #761872MA
$7.95
Special Order
NUT
Part #5025391FS
$29.95
Special Order
Pin
Part #500016MA
This genuine OEM axle shaft pin is designed for use with Murray and Simplicity snow throwers. Made from durable metal, this part securely connects the wheel to the axle shaft, ensuring proper traction and movement during operation.
To ensure compatibility, it’s recommended to consult your model’s parts diagram before ordering. This pin...Read more is sold individually and is an essential component for maintaining the structural integrity and performance of your snow thrower.
Read less
No Longer Available
Screw
Part #699234
This is an original Briggs & Stratton replacement part. The screw is designed by the manufacturer for use in engines such as those found in snow throwers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to t...Read morehe parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. This part is sold individually.
Read less
No Longer Available
Hair Pin
Part #1501293MA
No Longer Available
SCREW, 10-24X.375
Part #706144
No Longer Available
Pulley
Part #1501115MA
This is an authentic manufacturer-sourced component from the Murray manufacturer. The friction pulley is constructed of durable metal, and is made for use with many snowthrower machines. The friction pulley is secured onto the swinging l.f. plate (yz), assisting with the movement of the snowblower through the rotation of the friction disc...Read more. This component also helps the drive belt transmit force to related components. This item is sold individually. A wrench and a screwdriver are often necessary for the replacement.
Read less
No Longer Available
CAP-FUEL TANK
Part #BS-795027
No Longer Available
Nut, 5/16" - 18
Part #22259GS
No Longer Available
Guard-Muffler
Part #796384
Common Symptoms of the 1695953
How this model fails, and the parts that fix it.
Drive system does not work
Fixed by
these parts
these parts
Show All
Auger will not turn
Fixed by
these parts
these parts
Show All
Will not blow snow
Fixed by
these parts
these parts
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refurbishing for next winter season
8 of 14 people
found this instruction helpful.
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel.
... Read more
This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!