1695874 (2010) Briggs and Stratton Snow Blower - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lower Drive Cable (12'') – Part Number: 1501122MA
$15.95
In Stock
Lower Drive Cable (12'')
Part #1501122MA
This lower front drive cable is designed to engage and disengage the traction system on two-stage snowblowers, allowing smooth, reliable forward and reverse movement. Built with a durable steel inner wire and protective outer conduit, it helps maintain consistent drive response in cold, demanding conditions. Ideal for replacing a stretched, frayed, or broken cable, it restores dependable traction control and easy handling during snow-clearing operation.
NUT – Part Number: 5025391FS
$7.95
Special Order
NUT
Part #5025391FS
Screw – Part Number: 699234
No Longer Available
Screw
Part #699234
This is an original Briggs & Stratton replacement part. The screw is designed by the manufacturer for use in engines such as those found in snow throwers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. This part is sold individually.
Hair Pin – Part Number: 1501293MA
No Longer Available
Hair Pin
Part #1501293MA
SCREW, 10-24X.375 – Part Number: 706144
No Longer Available
SCREW, 10-24X.375
Part #706144
Pulley – Part Number: 1501115MA
No Longer Available
Pulley
Part #1501115MA
This is an authentic manufacturer-sourced component from the Murray manufacturer. The friction pulley is constructed of durable metal, and is made for use with many snowthrower machines. The friction pulley is secured onto the swinging l.f. plate (yz), assisting with the movement of the snowblower through the rotation of the friction disc. This component also helps the drive belt transmit force to related components. This item is sold individually. A wrench and a screwdriver are often necessary for the replacement.
Screw – Part Number: 594618
No Longer Available
Screw
Part #594618
This authentic replacement part is supplied directly from the original equipment manufacturer for use with lawn and garden equipment. It is an identical replacement for a missing or a faulty screw that was installed on a new unit. This is one of the special screws that are utilized to secure the blower housing, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.
CAP-FUEL TANK – Part Number: BS-795027
No Longer Available
CAP-FUEL TANK
Part #BS-795027
Nut, 5/16" - 18 – Part Number: 22259GS
No Longer Available
Nut, 5/16" - 18
Part #22259GS
Guard-Muffler – Part Number: 797095
No Longer Available
Guard-Muffler
Part #797095
Shaft, Impeller – Part Number: 1750533YP
No Longer Available
Shaft, Impeller
Part #1750533YP
Gearbox Assembly – Part Number: 1750632YP
No Longer Available
Gearbox Assembly
Part #1750632YP

Common Symptoms of the 1695874

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refurbishing for next winter season
8 of 14 people found this instruction helpful.
  • Kenneth from ALDAN, PA
  • Easy
  • 30 - 60 mins
  • Socket set, Wrench set
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel. This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.
Was this helpful?
Thank you for voting!