My Orders
16957 - Overview
Models starting with 16957
Click on the best match to narrow your results.
- 16957 Craftsman Compressor (Air Compressor)
- 1695710 Briggs and Stratton Lawn Tractor Accessories (1695710 - Catcher, Clean Sweep Triple, 46" & 52")
- 1695716 (2009) Briggs and Stratton Snow Blower (1695716 - Dynamark, 21" Single Stage Snow Thrower (2009))
- 1695717-C950-52903-0 (2009) Briggs and Stratton Snow Blower (1695717 - C950-52903-0, 21" Single Stage Snow Thrower (2009))
- 1695724 (2009) Briggs and Stratton Snow Blower (1695724 - Brute 27" 11.5 Tp Snowthrower (2009))
- 1695725 (2009) Briggs and Stratton Snow Blower (1695725 - Brute 29" 13.5 Tp Snowthrower (2009))
- 1695730 (2009) Briggs and Stratton Snow Blower (1695730 - Brute 29" 14.5 Tp Snowthrower (2009))
- 1695731 (2009) Briggs and Stratton Snow Blower (1695731 - Dynamark 24" Dual Stage Snowthrower (2009))
- 1695732 (2009) Briggs and Stratton Snow Blower (1695732 - Brute 27" 11.5 Tp Snowthrower (2009))
- 1695733 (2009) Briggs and Stratton Snow Blower (1695733 - Brute 33" 16.5 Tp Snowthrower (2009))
- 1695736-C950-52943-0 (2009) Craftsman Snow Blower (1695736 - C950-52943-0, Craftsman Dual Stage 27" Snow Thrower (2009))
- 1695737-C950-52948-0 (2009) Craftsman Snow Blower (1695737 - C950-52948-0, Craftsman Dual Stage 30" Snow Thrower (2009))
- 1695739-C950-52946-1 (2010) Craftsman Snow Blower (1695739 - C950-52946-1 Craftsman 24" Dual Stage Snow Thrower (2010))
- 1695739A-C950-52946-0 (2009) Craftsman Snow Blower (1695739a - C950-52946-0, Craftsman 24" Dual Stage Snow Thrower (2009))
- 1695741-C950-52913-0 (2009) Craftsman Snow Blower (1695741 - C950-52913-0, Craftsman Dual Stage 27" Snow Thrower (2009))
- 1695741-C950-52913-1 (2010) Craftsman Snow Blower (1695741 - C950-52913-1, Craftsman Dual Stage 27" Snow Thrower (2010))
- 1695744-C950-52951-1 (2010) Craftsman Snow Blower (1695744 - C950-52951-1, Craftsman Dual Stage 31" Snow Thrower (2010))
- 1695744A-C950-52951-0 (2009) Craftsman Snow Blower (1695744a - C950-52951-0, Craftsman Dual Stage 31" Snow Thrower (2009))
- 1695745-C950-52955-0 (2009) Craftsman Snow Blower (1695745 - C950-52955-0, Craftsman 27" Dual Stage Snow Thrower (2009))
- 1695748-C950-52956-0 (2009) Craftsman Snow Blower (1695748 - C950-52956-0, Craftsman 30" Dual Stage Snow Thrower (2009))
- 1695749-18-2864-30 (2009) Briggs and Stratton Snow Blower (1695749 - 18-2864-30 Snow Spark Es 24" Dual Stage Snowthrower (2009))
- 1695750-18-2830-30 (2009) Briggs and Stratton Snow Blower (1695750 - 18-2830-30 Sno Blizzard Dual Stage Snowthrower (2009))
- 1695751-18-2829-30 (2009) Briggs and Stratton Snow Blower (1695751 - 18-2829-30, 29" Sno Flake Dual Stage Snowthrower (2009))
- 1695752-18-2847-30 (2009) Briggs and Stratton Snow Blower (1695752 - 18-2847-30, 33" Snow Power Dual Stage Snowthrower (2009))
- 1695753-18-2852-30,1381HST (2009) Briggs and Stratton Snow Blower (1695753 - 18-2852-30, 1381 Hst, Dual Stage Snowthrower (2009))
- 1695757 Briggs and Stratton Lawn Tractor Accessories (1695757 - Turbo, 54" Mower Deck)
- 1695771-C950-52844-1 (2009) Craftsman Snow Blower (1695771 - C950-52844-1, Craftsman, 22" Single Stage Snow Thrower (2009))
- 1695776 Briggs and Stratton Lawn Tractor Accessories (1695776 - Catcher, Clean Sweep Triple, 46" & 52")
- 1695776-01 Briggs and Stratton Lawn Tractor Accessories (1695776-01 - Catcher, Clean Sweep Triple, 46" & 52")
- 1695790-LP25941-1338PE (2010) Briggs and Stratton Snow Blower (1695790 - Lp25941 - 1338pe, 16.5tp 38" Professional Snow Thrower (2010))
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$13.95
Special Order
Key Set
Part #691959
This is an OEM replacement part for Briggs and Stratton, Murray, Snapper, and Simplicity engines. When engaged the ignition key starts the lawn tractor. This part is made of metal and is sold in a set of two. There are no tools needs to use this part, as it comes pre-assembled and really to use.
$91.95
Special Order
Muffler
Part #699565
$7.95
Special Order
Screw, 3/8 - 16 X 1-1/4 Taptit
Part #75246GS
$6.95
In Stock
Engine Filter
Part #298090S
This is a genuine OEM sourced replacement part, it is made out of plastic with filter material inside. It is sold individually and is used on a variety of lawn and garden engines. This is an fuel filter for engines with a fuel pump which makes sure that the fuel delivered to the engine is free of any debris or contaminants. It will over t...Read moreime become clogged and restrict the fuel getting to the engine so it will need to be replaced.
Read less
$15.95
In Stock
Lower Drive Cable (12'')
Part #1501122MA
This lower front drive cable is designed to engage and disengage the traction system on two-stage snowblowers, allowing smooth, reliable forward and reverse movement. Built with a durable steel inner wire and protective outer conduit, it helps maintain consistent drive response in cold, demanding conditions. Ideal for replacing a stretche...Read mored, frayed, or broken cable, it restores dependable traction control and easy handling during snow-clearing operation.
Read less
$36.95
In Stock
V Belt (4L)
Part #37X120MA
A genuine OEM supplied replacement part that is specially designed for use with Craftsman snowblowers. This is the special transmission belt that helps to drive the unit, please make sure to check appropriate diagrams of your model for correct location and use of this item. Over time due to normal use belts tend to wear out and stretch ev...Read moreentually requiring replacement to keep your equipment running at peak level. It is made of durable rubber material and it is sold individually.
Read less
$29.95
Special Order
Auger Clutch Cable
Part #761872MA
$7.95
Special Order
NUT
Part #5025391FS
$6.95
Special Order
$29.95
Special Order
Pin
Part #500016MA
This genuine OEM axle shaft pin is designed for use with Murray and Simplicity snow throwers. Made from durable metal, this part securely connects the wheel to the axle shaft, ensuring proper traction and movement during operation.
To ensure compatibility, it’s recommended to consult your model’s parts diagram before ordering. This pin...Read more is sold individually and is an essential component for maintaining the structural integrity and performance of your snow thrower.
Read less
$13.95
Special Order
Strap
Part #2171600SM
An authentic item that is supplied by the original manufacturer for use with Snapper, Murray and Simplicity lawn and garden equipment. It is an identical replacement for a missing or damaged hood strap that was originally installed on a new unit, please make sure to chuck the appropriate diagrams of your model for the correct location and...Read more application of this component. Keep in mind this high-quality item is made of durable black rubber material and is sold individually.
Read less
$6.95
Special Order
BOLT
Part #5025011X8FS
Common Symptoms of models starting with 16957
How this model fails, and the parts that fix it.
Drive system does not work
Fixed by
these parts
these parts
Show All
Auger will not turn
Fixed by
these parts
these parts
Show All
Will not blow snow
Fixed by
these parts
these parts
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refurbishing for next winter season
8 of 14 people
found this instruction helpful.
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel.
... Read more
This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!